1 / 40

Construction Site Stormwater Compliance Presentation for CALBIG October 9, 2013

Construction Site Stormwater Compliance Presentation for CALBIG October 9, 2013. Kristin Kerr, P.E., QSD EOA, Inc. on behalf of the San Mateo Countywide Water Pollution Prevention Program. Outline of Presentation. Overview of Stormwater Regulations

adler
Download Presentation

Construction Site Stormwater Compliance Presentation for CALBIG October 9, 2013

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Construction Site Stormwater CompliancePresentation for CALBIGOctober 9, 2013 Kristin Kerr, P.E., QSD EOA, Inc. on behalf of the San Mateo Countywide Water Pollution Prevention Program

  2. Outline of Presentation • Overview of Stormwater Regulations • MRP Construction Site Inspection Requirements • Stormwater Inspection Documentation and Tracking • Enforcement • Resources

  3. Stormwater Regulations 101 The Clean Water Act • Requires a Permit to discharge into Waters of the State from Point Sources • Wastewater Treatment Plants • Industrial Facilities • NPDES (National Pollutant Discharge Elimination System) Permits

  4. 1986 Amendments: Stormwater Nonpoint Source • Requires permits to discharge stormwater from: • Municipal Separate Storm Drains (MS4) • Industrial Facilities • Construction Sites • NPDES Municipal Stormwater Permits • Larger municipalities’ permits called Phase 1 and smaller ones Phase 2

  5. Why Regulate Pollutants in Stormwater? • A storm drain system is completely separate from the sanitary sewer system • Water entering storm drains generally receives no treatment before discharging to creeks and the Bay

  6. Municipal NPDES Permitting Authority

  7. Stormwater Permits • Individual NDPES Stormwater Permits – issued by Regional Board • Municipal Regional Permit (MRP) • Statewide NPDES General Stormwater Permits – issued by State Board • Industrial General Permit (IGP) • Construction General Permit (CGP) • Phase II MS4 General Permit

  8. Statewide General Permits • NPDES authority issues one permit • Used to cover same or similar operations • Facilities/municipality applies for coverage • Facilities/municipality submits Notice of Intent (NOI)

  9. Statewide Construction Activities General Permit • Revised Permit adopted by State Board & effective July 1, 2010 • Applies to projects that disturb ≥1 acre of land – Public & Private • Contains requirements for site BMPs, inspections, sampling, SWPPP, reporting, QSP/QSD • Compliance inspections & enforcement by Regional Water Board staff

  10. What do you need to know about the Construction General Permit (CGP)? • MRP Inspections: looking at SWPPP, QSP inspection records, sampling results, etc. may help inform your inspection • Public projects ≥ 1 acre must file for coverage under the CGP - will you be involved? • Overall site compliance reflects on your inspection program • You inspect for compliance with local SW ordinance • Regional Board staff inspects for compliance with CGP

  11. Municipal Regional Permit (MRP) • Regional permit regulating municipal stormwater systems • Adopted by Regional Water Board: October 14, 2009 • Effective date: December 1, 2009 • Permit renewed every 5 years • Applies to cities, counties, and districts in: • San Mateo, Santa Clara, Alameda, and Contra Costa Counties • Fairfield and Suisun City (Solano County) • Vallejo (Solano County)

  12. MRP Permit Provisions • C1 – Compliance with Discharge Prohibitions • C2 – Municipal Maintenance • C3 – New Development and Redevelopment • C4 – Industrial and Commercial Discharge • C5 – Illicit Discharge Detection and Elimination • C6 – Construction Inspection • C7 – Public Information and Outreach • C8 – Water Quality Monitoring • C9 – Pesticide Toxicity Control • C10 – Trash Reduction • C11 – Mercury Load Reduction • C12 – PCBs • C13 – Copper • C14 – PBDE and Legacy Pesticides • C15 – Exempted & Conditionally Exempted Discharges • C16 – Reporting

  13. MRP Construction Site Inspection Requirements Big Picture Requirements… • Implement a construction site inspection and control program at all construction sites • Prevent discharges of pollutants and impacts on receiving waters • When does this apply? • All year long!

  14. MRP Construction Site Inspection Requirements • During wet season, at least 1 stormwater inspection per month for • sites disturbing > 1 acre • “high priority” sites • Inspect both Public (e.g. CIP projects) & Private sites

  15. MRP Construction Site Inspection Requirements • What is a high priority site? • Identified by your municipality • Generally, site with < 1 acre of land disturbance that • Has a steep slope and/or, • Is adjacent to a creek

  16. MRP Construction Site Inspection Requirements When is the wet season? October 1st – April 30th

  17. Construction Site Inspections • When construction ends during wet season: • Continue stormwater inspections until site is fully stabilized. • If stabilizing with vegetation, assume “fully stabilized” when there is 70% vegetative cover.

  18. Construction Site Inspections • For every required stormwater inspection, there must be a completed inspection checklist.

  19. Construction Site Inspections • For sites that require monthly wet season inspections, data from the stormwater inspection checklist must be: • Tracked (in spreadsheet or database), and • Reported (in Annual Report).

  20. Construction Site Inspections • Tracking table is not submitted in Annual Report but is the basis for Annual Report data summaries • Regional Board can request tracking table at any time • Inspection tables should match summaries in Annual Report

  21. Stormwater Inspection Forms

  22. Stormwater Inspection Form • Document Problems in 6 BMP categories: • Erosion control • Run-on and run-off control • Sediment control • Active treatment systems (as needed) • Good site management • Non-stormwater management

  23. Stormwater Inspection Forms • Document Illicit Discharges

  24. Stormwater Inspection Forms • Enforcement Actions • Resolution of Problem • Problems fixed • Need More Time • Escalate Enforcement • Comments: rationale for longer compliance time, all escalation in enforcement discussions, relevant information

  25. Enforcement Options and Reporting

  26. Enforcement Response Plan (ERP) • Each agency must have and implement an ERP • ERP provides framework for consistent and effective enforcement • ERP must include progressive (escalating) enforcement • The Program prepared an ERP template in 2010 • Agencies developed ERPs based on the template

  27. What’s in an ERP? • Identifies enforcement actions and timeframes for correction of violations. • Timeframes: Violations must be corrected • Within 10 business days , • Or before next rain event, • OR record rationale for longer compliance. • Procedures for escalating the enforcement response.

  28. Example of Progressive Enforcement

  29. Documenting Violations • Violations identified during inspections (and other data) must be recorded on inspection form. • The specific category of the violation must be indicated. • Example on next slides.

  30. Documenting Violations: Example

  31. Documenting Violations: Example

  32. Documenting Enforcement • For all violations: Show the level of enforcement on the checklist. • Should be appropriate to violation and lead to timely, corrective compliance. • Repeat violations should result in escalated enforcement response level. • Indicate the timeframe for correcting violation on checklist.

  33. Lessons Learned from 2013 ERP NOVs • Provide field scenarios for each level of enforcement. • Give timeframes and procedures to verify corrective actions implemented within 10 business days or before next rain. • Include discussion of which staff has authority to issue each level of enforcement.

  34. Lessons Learned from 2013 ERP NOVs • Provide discussion of escalating responses for repeat violations. • There should be consistent enforcement action in the ERP and Annual Report.

  35. What else should you know about the MRP? • Provision C.13.a. manage waste generated from cleaning/treating copper architectural features during construction • SMCWPPP BMP Fact Sheet

  36. What else should you know about the MRP? • Provision C.3.h Stormwater Treatment Systems Operation &Maintenance (O&M) Verification Inspections • Municipalities must maintain a database of Regulated Project treatment/HM controls • Report on inspections in Annual Report

  37. What else should you know about the MRP? • SW Treatment Systems O&M Inspections continued.. • specific requirements for number of inspections and frequency: • Inspection of new BMPs within 45 days of installation • Inspection of at least 20% of all BMPs installed • Inspection of at least 20% of total vault-based or proprietary systems • Inspection of all BMPs at least once every 5 years

  38. For More Information… • Municipal Regional Stormwater Permit www.waterboards.ca.gov/sanfranciscobay/water_issues/programs/stormwater/mrp.shtml • SMCWPPP Construction BMP Resources http://www.flowstobay.org/construction • CASQA Construction BMP Handbook Portal (available on web by subscription – contact your agency stormwater coordinator for information on how to access the portal)www.casqa.org

  39. Contact Information: Kristin Kerr EOA, Inc. kakerr@eoainc.com 510-832-2852, X122

More Related