1 / 20

MOULD IN BUILDINGS

MOULD IN BUILDINGS. New Plymouth Conference – November 2013 Philip O’Sullivan, Director. Typical Buildings Affected. Residential Educational Healthcare Accommodation Offices. All You Need Is:. Dampness. Cellulose. Air. Spores. Cellulose is common in many building products:.

aelan
Download Presentation

MOULD IN BUILDINGS

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. MOULD IN BUILDINGS New Plymouth Conference – November 2013 Philip O’Sullivan, Director

  2. Typical Buildings Affected • Residential • Educational • Healthcare • Accommodation • Offices

  3. All You Need Is: Dampness Cellulose Air Spores

  4. Cellulose is common in many building products: • Timber • Reconstituted wood panels e.g. particle board • Plasterboard (paper faced) • Kraft-based building papers e.g. black building paper • Fibre cement e.g. Hardiflex • Carpet with jute backing

  5. And in all types of construction: • Light timber framed • Light steel framed • Reinforced concrete masonry • Reinforced concrete • Structural Steel

  6. Typical causes of dampness • Leaking roofs • Leaking walls • Plumbing leaks • Air-conditioning – condensate drain leaks • Subfloor dampness – often poor ventilation • Flooding

  7. Reinforced Concrete Masonry

  8. Inside View

  9. Steel Framing

  10. Timber Framing

  11. Symptoms • Health issues (Adrienne to discuss) • Internal evidence of mould in walls – not common • Most often no obvious symptoms

  12. Best to obtain information BEFORE remediation commences • Sample collection - Adrienne to explain • Prendos prefers air sampling – helpful diagnostic tool • AVOID removing internal linings - if no choice then cover and seal opening

  13. Example from air sampling in concrete building with light steel framed walls. Colour coded to mould type and anticipated level of dampness. Diagnostic Techniques

  14. Comparing spore levels with possible levels of dampness Retaining Wall Leak Balcony Leaks Damp subfloor

  15. Options if high spore levels encountered: • Eliminate –takes time to remediate • Isolate – only if parts of building can be closed and sealed off • Minimise – improve ventilation or use recirculating air filters • Fixing or preventing the leak, without mould removal, often leads to increased spore levels. • Need to undertake on-going air testing if building is to remain occupied.

  16. Remediation - localised • If leak localised then possible to seal off affected area and remediate. • Need H&S plan • Provide negative pressure – extract fan to outside • Provide separate access from outside to prevent contamination • Check spore levels after decontamination and re-clean if necessary. • Check again as may have missed some contaminated material.

  17. Remediation-global • If leakage affecting a substantial part, or all of building then usually best for occupants to vacate during repairs. • If mould in external walls then leave lining on, remove cladding and remove other materials while damp. • If mould from located internally (roof or services leak): • Provide negative pressure – extract fan to outside. • Remove mould affected material. • Check spore levels after decontamination and re-clean if necessary. • Recheck as may have missed some contaminated material.

  18. Severely decayed timber and mould spore levels were very high

  19. Decayed untreated timber, very limited mould growth.

  20. Thank You • Any Questions?

More Related