1 / 9

Design and Construction of an Induction Furnace (Cooling System)

Design and Construction of an Induction Furnace (Cooling System). Presented By MG THANT ZIN WIN Roll No: Ph.D-M-7 4 th Seminar 30.6.2004. Presentation Outlines. Objective Features of Induction Melting Furnace

agnes
Download Presentation

Design and Construction of an Induction Furnace (Cooling System)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Design and Construction of an Induction Furnace(Cooling System) Presented By MG THANT ZIN WIN Roll No: Ph.D-M-7 4th Seminar 30.6.2004

  2. Presentation Outlines • Objective • Features of Induction Melting Furnace • Heat Balance of Induction Furnace • Energy Saving Measures for Induction Furnace • Conclusion

  3. Objective • To know the features of induction furnace, heat balance compared with low-frequency induction furnace and high-frequency induction furnace, and energy saving measures.

  4. Features of Induction Melting Furnace • Heat efficiency is high. • No CO2, Little smoke & soot. • Little oxidation/contamination. • Temperature control is simple. • Installation space is reduced.

  5. Heat Balance of Induction Furnace • Total Efficiency Fig – Heat balance diagram of crucible type induction furnace

  6. Energy Saving Measures for Induction Furnace • Improved Heat Efficiency by Improvement of Furnace • Improvement of Heat Efficiency in Operation • Preheating of Material

  7. Improved Heat Efficiency by Improvement of Furnace • Equipment Layout • Frequency

  8. Improvement of Heat Efficiency in Operation • Furnace cover should be closed as far as possible. • Molten metal should be held at low temperature and in short time. • Dust collecting hood. • Cleaning of sand, rust and other dirts.

  9. Conclusion • Many features have induction melting furnace. • Total efficiency of high-frequency induction furnace is more preferable than low-frequency induction furnace. • You must try to improve heat efficiency in operation carefully. Thank You

More Related