1 / 36

ATCA Systems

ATCA Systems. Technology Meeting 10.2.2009 CERN Genève. AdvancedTCA Systems Platforms according to PICMG 3.0 currently produced by Elma Electronic, Inc. 44350 Grimmer Blvd. Fremont, CA 94538, USA. Table of Contents 2U ATCA Systems Platforms CAP002002 CAP002021 CAP002034

albin
Download Presentation

ATCA Systems

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ATCA Systems Technology Meeting 10.2.2009CERN Genève

  2. AdvancedTCA Systems Platformsaccording to PICMG 3.0currently produced byElma Electronic, Inc.44350 Grimmer Blvd.Fremont, CA 94538, USA

  3. Table of Contents • 2U ATCA Systems Platforms • CAP002002 • CAP002021 • CAP002034 • 4U ATCA Systems Platforms • CAP001638 • CAP002030 • 5U ATCA Systems Platforms • CAP001476 • 12U ATCA Systems Platforms • CAP001279 • CAP001800 • CAP001861 • 13U ATCA Systems Platforms • CAP002014

  4. ATCA Systems Platform 2U, CAP0020022 slot with RTM, 1 Shelf Manager fix mount, 2 Fan Trays pluggable with 3 Fans each, Air Filter, 1 PSU 115VAC / 250W fix mount Front View

  5. ATCA Systems Platform 2U, CAP0020022 slot with RTM, 1 Shelf Manager fix mount, 2 Fan Trays pluggable with 3 Fans each, Air Filter, 1 PSU 115VAC / 250W fix mountRear View

  6. ATCA Systems Platform 2U, CAP0020212 slot without RTM, 2 Shelf Manager pluggable, 2 Fan Trays pluggable with 4 Fans each, Air Filter, 1 PSU 115VAC / 500W fix mountFront View

  7. ATCA Systems Platform 2U, CAP0020212 slot without RTM, 2 Shelf Manager pluggable, 2 Fan Trays pluggable with 4 Fans each, Air Filter, 1 PSU 115VAC / 500W fix mountRear View

  8. ATCA Systems Platform 2U, CAP0020342 slot with RTM, 1 Shelf Manager fix mount, 2 Fan trays pluggable with 3 Fans each, Air Filter, Dual, redundant -48VDC FeedsFront View

  9. ATCA Systems Platform 2U, CAP0020342 slot with RTM, 1 Shelf Manager fix mount, 2 Fan trays pluggable with 3 Fans each, Air Filter, Dual, redundant -48VDC FeedsRear View

  10. ATCA Systems Platform 4U, CAP0016385 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, Single -48VDC FeedFront View

  11. ATCA Systems Platform 4U, CAP0016385 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, Single -48VDC Feed Rear View

  12. ATCA Systems Platform 4U, CAP0020305 slot with RTM, 2 Shelf Managers fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, Dual, redundant -48VDC FeedsFront View

  13. ATCA Systems Platform 4U, CAP0020305 slot with RTM, 2 Shelf Managers fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, Dual, redundant -48VDC FeedsRear View

  14. ATCA Systems Platform 5U, CAP0014765 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, 1 PSU 90-264VAC / 600W, N+1, fix mount Front View

  15. ATCA Systems Platform 5U, CAP0014765 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, 1 PSU 90-264VAC / 600W, N+1, fix mount Rear View

  16. 5U ATCA with Rear I/O DCA0 • Dual Shelf Manager • Push Pull Fan Configuration • Filter Tray removable from the Front • Dual 48V input • Easy Conversion to AC Version • Carrying Handles for Lab transportation

  17. Easy removable Fan Tray left and right. No Tools required. Right Fan Tray with integrated Filter. Left side 8 Fans 80mm al the way to the back for rear I/O cooling. Right fan tray 6 Fans 80mm.

  18. Filter Tray extended to cover Rear I/O Area. • Removable from the Front. No Tools required. • Filter Mesh washable fixed with Velcro to the Filter tray. • Fan Tray stays in Place.

  19. Two Shelf manager installed on Top of Card cage. • Easy Removable from the Front trough the convenient ELMA Hot Swap Handle.

  20. ON/OFF Switch located above left Fan Tray, for easy Start or shut down. • ESD Jack located in Front for easy plug in. Marked with Yellow Plate to get attention.

  21. For Easy Transportation additional Carrying Handle on each Side. • Integrated to stay in the 19 Inch Width.

  22. DC-Version • DC Version with two Filtered Terminal Blocks including Safety cover. • DC Hole Arrangement cover with Patch-Panel. • ESD Jack on the left Top for easy Access. Marked with Yellow Silkscreen Plate to get Attention. • Grounding Feature with Bridge to connect Logic Ground to Chassis Ground if needed. AC-Version

  23. Easy update to AC Version with ELMA AC-Update-Kit, including PSU 1000W and all necessary Components like Fuse holders and Plugs. Assembly provisions and already included in Sheet metal Parts.

  24. Height: 5U 221.4mm Width Front: 19” 482.6mm Width Rear: 17.5” 444.5mm Depth: 16.5” 419.1mm Overall Depth Flange to Terminal Block 17” 431.8mm

  25. ATCA Systems Platform 12U, CAP00127914 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, 1 PSU 90-264VAC / 600W, N+1, fix mount Front View

  26. ATCA Systems Platform 12U, CAP00127914 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, 1 PSU 90-264VAC / 600W, N+1, fix mount Rear View

  27. ATCA Systems Platform 12U, CAP001800 / CAP00186114 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, 1 PSU 90-264VAC / 600W, N+1, fix mount Front View

  28. ATCA Systems Platform 12U, CAP001800 / 186014 slot with RTM, 1 Shelf Manager fix mount, 1 Fan tray pluggable with 2 Fans, Air Filter, 1 PSU 90-264VAC / 600W, N+1, fix mount Rear View

  29. ATCA Custom Design -Dust ProtectedATCA SystemProposal for XFEL Tunnel Application DESY Hamburg

  30. Dust Protected Special:Cross flowheat exchanger 4 U System with 2 Slots 1 Shelfmanager1 Powersupply

  31. Dust Protected 7U ATCA System2 Powersuppliesmin 500 Watts, each 1 Shelfmanager5 SlotsSpecial:Cross flow heatexchanger

  32. Dust Protected • Design Features: • Top bottom hinged front door • Screw mounted frontpanels • The screws are locked with 90° rotation • Special design for robot handling • Total closed cardgage • Cooling via heat exchanger • AC Input redundance (7U System) • Space for a special zone 3 Backplane • Horizontal Form factor • Fan Blocks in front and on side of heat exchanger

  33. Laboratory Systems

  34. ATCA CPU Board (Example) More Details on :www.powerbridge.de

  35. ATCA I/O Carrier Supported by: ATCA Carrier Board with four AMC Slots, each Slot with four 10GbE Channels

  36. Elma Electronic offers Solutions for the future

More Related