1 / 4

TECHNICAL DATA SHEET

TECHNICAL DATA SHEET. PRODUCT NAME : FRP TANKS. Fiberglass Reinforced Plastic Tanks. eZee-FRPT Series. SECTION 1 PRODUCT IDENTIFICATION & COMPANY. Product Name EZ FRP TANKS Supplier EZ Water Technology USA

alfredc
Download Presentation

TECHNICAL DATA SHEET

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. TECHNICAL DATA SHEET PRODUCT NAME : FRP TANKS Fiberglass Reinforced Plastic Tanks eZee-FRPT Series SECTION 1 PRODUCT IDENTIFICATION & COMPANY Product Name EZ FRP TANKS Supplier EZ Water Technology USA Address 1647 S, Main St. Suite 200 Milpitas CA 95035, USA Telephone No 1.888.EZ.TECH7 (888.398.3247) E-mail info@ezwatertechnology.com Web www.ezwatertechnology.com SECTION 2 PRODUCT INFORMATION • MATERIALOFCONSTRUCTION • Inner shell material Polyethylene • DESIGN PARAMETERS • Safety Factor 4:1(Minimum Burst at 600 Psi) • Cycle Test 100,000 cycles without leakage • DESIGN PARAMETERS • ASME • Pressure tanks are made of high performance Composite material with FRP filament winding • All pressure tanks, residential and commercial, are made by a complete seamless molding technology. • All thread inlet made from 30 % glass filled PP provides higher strength, temperature and pressure limits versus glass filled PE. • Liner wall thickness available from 0.15” (3.0mm) to 0.3” (7.6mm) corresponding to the tank diameter. • -Full choice of pressure tank from 6” to 48” in diameter and from 10” to 72” in height. • Top opening type available for 6” through 36”diameter pressure tanks; top and bottom opening type available for 18” through 48” diameter pressure tanks. • Reinforced composites are one third the weight of steel tanks. • All pressure tanks are 100% corrosion resistant. SECTION 3 PRODUCT FEATURES

  2. SECTION 4 PRODUCT SPECIFICATIONS

  3. SIZE A O.D. B Composite/ NumberofFull Pressure A Number Weight ° 45 Size Polyglass Threads Composite Material Rating Tapping Size L I.D. B.C. O.D. B oltDia. ofHoles ( lbs. ) 2.5"-8 "NPSM 6 3 min 6 CPVC 100 psi Asrequested 6 "SNA 3.6 " 5.9 " 8.5 " 9.4 " 0.31 " 12 5.8 B Number Weight Size L I.D. B.C. O.D. BoltDia. ofHoles ( lbs. ) B.C. 4 "-8"UN 7 3 min 7 VE 150 psi Asshownonly 10 "ANSI 3.7 " 10.0 " 14.3 " 16.0 " 0.88 " 12 17.8 I.D. B.C. L 4 "ANSI 4.1 " 4.0 " 7.5 " 9.0 " 0.63 " 8 6.4 I.D. 4.5"-8 "Buttress 7 3 min 7 16 "ManwaySNA 4.3 " 16.0 " 20.4 " 21.3 " 0.50 " 24 34.0 L # FULL THREADS O.D. Top and bottom Opening threads Top and bottom Opening Flanges/Manway Manway Cover SideFlange

  4. SECTION 5 DOME-HOLE PRESSURE TANKS • Dome-hole tanks are available in tank diameter 10”, 12” and 13”. • The dome-hole tank equipped with 1.25” opening on the dome top of the tank. • Tank adapter made by injection molding with GE Noryl plastic. • The advantage of the dome-hole tank provides the fastest and most convenience way of solution for media replacement without detaching any plumbing and valve. • Different positions of the dome • Hole are available for multi-port valves from different manufacturers. • SECTION 6 HIGH QUALITY LINER • Pressure tank liner made from high quality imported Polyethylene resin from Dow Chemical. • Liner wall thickness available from 0.15” (3.0mm) to 0.3” (7.6mm) corresponding to the tank diameter. Standard liners are natural color. • We also produces a special colored liner which is completely opaque to sunlight pass through and provides solution to Algae and micro-organism growth in side the tank due to hot and humid weather in most of the tropical and Middle-East Countries • SECTION 7 FLANGE TANK • Flange tank from 18” to 48”. • The flange is made from a strong solid anodized Aluminum casting. • It provides excellent strength, durability and leak free. • The flanged tank is available in 6” flange top opening with standard base or both 6” flange top/bottom openings with tripod base. • Our pressure tanks are made up of high performance composite material with fiber glass filament wound high strength polyethylene liner. - Wave Cyber flange tanks are NSF and PED certified Accessories we supplies adapters, reducers and closures for both 4” thread and 6” flange tank • SECTION 8 CHOICE OF COLORS • We provide wide ranges of color pressure tank selection such as Natural (standard), Black, Blue, Almond, Brown,Orange , Green and Grey. • Other custom color is available on request. 1647 S, Main St. Suite 200 Milpitas CA 95035, USA Toll Free Phone: 1.888.EZ.TECH7 (888.398.3247) Toll Free Fax: 1.888.EZ.TECH8 (888.398.3248) Email: info@ezwatertechnology.com Web: www.ezwatertechnology.com

More Related