1 / 16

ASIC 121: Practical VHDL Digital Design for FPGAs

ASIC 121: Practical VHDL Digital Design for FPGAs. Tutorial 2 October 4, 2006. Contributions. I have taken some of the slides in this tutorial from Jeff Wentworth’s ASIC 120. Combination vs Sequential. Combinational Logic Output only depends on input Examples: AND, OR, MUX

anila
Download Presentation

ASIC 121: Practical VHDL Digital Design for FPGAs

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ASIC 121: Practical VHDL Digital Design for FPGAs Tutorial 2 October 4, 2006

  2. Contributions • I have taken some of the slides in this tutorial from Jeff Wentworth’s ASIC 120

  3. Combination vs Sequential • Combinational Logic • Output only depends on input • Examples: AND, OR, MUX • Sequential Logic • Output depends on inputs and memory • Examples: State Machine, Counter

  4. Memory • Two popular ways of implementing memory: • Synchronous memory (most popular) • Uses Flip Flops with a Clock signal • Asynchronous memory • Uses Latches • Much more difficult to design with

  5. Basic Feedback Element: SR latch

  6. D Flip-Flop or Register

  7. ASIC 120 • Read through the ASIC 120 Tutorial 2 • Gives a good explanation of state machines and basic VHDL

  8. Independent Tasks • All students should have evaluation copies of Modelsim and Quartus II, if not see Tutorial 1

  9. Quartus II Exercise • This exercise builds on the one performed in Tutorial 1 • Open Quartus II, Select File->New Project Wizard, Select a valid working directory (should be an empty folder) • Name the project and entity “full_adder” • Click next for all other menus • Select File->New. Select VHDL File

  10. Quartus II Exercise Cont • Save the file as full_adder.vhd, with the contents: library ieee; use ieee.std_logic_1164.all; entity full_adder is Port ( i_X, i_Y, i_Cin : in STD_LOGIC; o_FA_Sum, o_FA_Cout : out STD_LOGIC ); end full_adder; architecture main of full_adder is Component half_adder Port ( i_A, i_B : in STD_LOGIC; o_Sum, o_Carry : out STD_LOGIC ); end Component; signal carry_1, carry_2, sum_1: STD_LOGIC;

  11. Quartus II Exercise Cont begin adder1 : half_adder Port map( i_A => i_X, i_B => i_Y, o_Sum => sum_1, o_Carry => carry_1); adder2 : half_adder Port map( i_A => i_Cin, i_B => sum_1, o_Sum => o_FA_Sum, o_Carry => carry_2); o_FA_Cout <= carry_1 or carry_2; end main;

  12. Quartus II Exercise Cont • Go to Project->Add Files and add the half_adder.vhd file from Tutorial 1 • You have now seen a hierarchical VHDL design with multiple files

  13. Quartus II Exercise Cont • Select Processing->Start->Analysis and Synthesis • Make sure it completes successfully • Next Step • Read through the help file under “simulation” • Try Simulating the design

  14. Full Adder Full Adder Full Adder Exercise 2 • Full adders can be chained together into something called a “ripple adder” • 3 bit adder (A + B = S): B2 A2 B1 A1 B0 A0 Carry Out Carry In S2 S1 S0

  15. Exercise 2 Cont’d • Create the architecture description for a 4 bit ripple adder to implement the entity: library ieee; use ieee.std_logic_1164.all; entity ripple_adder is port ( A : in std_logic_vector(3 downto 0); B : in std_logic_vector(3 downto 0); c_in : in std_logic; sum : out std_logic_vector(3 downto 0); c_out : out std_logic ); end ripple_adder;

  16. VHDL DFF (Flip Flop) library ieee; use ieee.std_logic_1164.all; entity DFF is port ( d, clk : in STD_LOGIC; q : out STD_LOGIC ); end DFF; architecture main of DFF is begin process (clk) begin if (clk'event and clk = '1') then q <= d; end if; end process; end main;

More Related