590 likes | 841 Views
Tri-Tech Medical Inc. Medical Gas Outlets. Medical Gas Outlets. DISS Ohmeda style Allied style Puritan style Recessed wall DISS Recessed ceiling Surface wall Console / Headwall Ambulance / Surgical Arm. Common Backs. Recessed/Console 360º swivel inlet tube 1/2” OD copper tubing
E N D
Tri-Tech Medical Inc. Medical Gas Outlets
Medical Gas Outlets • DISS • Ohmeda style • Allied style • Puritan style • Recessed wall • DISS Recessed ceiling • Surface wall • Console / Headwall • Ambulance / Surgical Arm
Common Backs • Recessed/Console • 360º swivel inlet tube • 1/2” OD copper tubing • Accommodates all styles of Outlet Latch Plates • ETL listed • Ambulance/ Surgical Arm • 360º swivel inlet tube • DISS or hose barb • Accommodates all styles of Outlet Latch Plates • ETL listed
DISS Outlets • Frontall™ design • Gangable • Full faceplate color coding • 5 inch centers • Primary & secondary checks • 360° positioning of extension tube
DISSSurface Outlets • Frontall™ design • Full faceplate color coding • Primary & secondary checks
Frontall™ Feature • Allows routine service of both the primary and secondary check valves without removing the nameplate or gas specific portions. • Very fast & easy to service • Primary check cartridge
Repairing DISS Front Bodies • These parts would be ordered separately • Cartridge (Negative and Positive gases) • Primary Check Seat and Ball Check (Positive gases only) • Chrome-Plated Body
Ohmeda Style Outlets • Accepts Ohmeda gas specific compatible male adaptors • Gangable • 5” centers • Allows routine service of both the primary and secondary check valves. • Full faceplate color coding
Ohmeda Style Surface Outlet • Accepts Ohmeda gas specific compatible male adaptors • Allows routine service of both the primary and secondary check valves. • Full faceplate color coding
Repairing Ohmeda style fronts • Remove screws • Remove body and plate
U-clip and washer remain. • Front body and plate
Replace body • Replace plate and screw
XQ1000-D Ohmeda style Front Latch Body • Can be ordered as an assembly, or in parts
Allied Style Outlets • Accepts Allied style gas specific compatible male adapters • Gangable, 5” centers • Full faceplate color coding • 1/2” OD copper tubing • Metal back and front plates • 360º swivel inlet tube
Allied Style Surface Outlets • Accepts Allied gas specific compatible male adapters • Full faceplate color coding
Repairing an Allied Style Front • Remove screws • Remove body and plate
Position o-ring and washer on new body • Place body on housing and replace plate
XA1000-D Front Latch Body • Can be ordered as an assembly, or in parts
Puritan Style Outlets • Accepts Puritan style gas specific compatible male adapters • Gangable, 5” centers • Full faceplate color coding • 1/2” OD copper tubing • Metal back and front plates • 360º swivel inlet tube
Puritan Style Outlets • Accepts Puritan gas specific compatible male adapters • Full faceplate color coding
Repairing a Puritan Style Front • Using manual screwdriver, remove screws • Remove body and small plate
Replace parts or entire body • Screw plate back in place with Manual screwdriver. • Do not over tighten
XP1000-E Puritan Latch Body • Can be ordered as an assembly or in parts
Console / Headwall Outlets • Available in DISS, Ohmeda, Puritan and Allied styles • DISS style includes Frontall™ features • Full faceplate color coding • Optional trim plate available
Ambulance / Surgical Arm Outlets • Available in DISS and Quick Connect styles • DISS and hose barb inlet connections • DISS includes Frontall™ features • Full faceplate color coding
Fairfield Rail Outlets • Three different styles
Trim Plates • Single gang through six gang • Large array of on center spacing • Can be customized to meet your needs
Ohmeda to Ohmeda Conversion Kits • Available for Diamond I to Diamond III • Available for Diamond II to Diamond III • Easy to install • Easy to service
Other Ohmeda Conversion Kits • Available for Melco/Foregger/Linde 9/16-18 and Chemetron/NCG to Diamond III • Easy to install and service
NFPA 99 REQUIREMENTS FOR • STATION OUTLETS/INLETSTRI-TECH PRODUCT • GAS SPECIFIC YES • STATION OUTLET TO HAVE PRIMARY AND SECONDARY CHECK YES • STATION INLET TO HAVE PRIMARY CHECK (SECONDARY CHECK PERMITTED) YES • SECONDARY VALVE TO CLOSE WHEN PRIMARY VALVE IS REMOVED YES • EACH OUTLET/INLET LEGIBLY IDENTIFIED ACCORDING TO 5.1.11.3 YES • THREADED OUTLETS/INLETS SHALL COMPLY WITH CGA V-5 (DISS) YES • STATION OUTLET/INLET COMPONENTS THAT ARE GAS SPECIFIC • NOT INTERCHANGEABLE YES • COPPER TUBES ON STATION OUTLETS SHALL BE 3/8 OD MIN • AND LESS THAN 8 INCHES LONG YES • COPPER TUBES ON STATION INLETS SHALL BE ½ OD MIN • AND LESS THAN 8 INCHES LONG YES • ADDITIONAL TESTING PERFORMED BY TRI-TECH • INITIAL PRESSURE TEST AND FINAL TIE IN TEST REQUIRED FOR LEAKAGE • AS WELL AS THE OPERATIONAL PRESSURE TEST REQUIRED FOR FLOW • IS PERFORMED ON ALL STATION OUTLETS/INLETS PRIOR TO SHIPPING
Tri-Tech Medical Inc. Gas Control Panels and Gas Control Panel Conversion Kits
Stainless steel front Self-relieving regulator Frontall™ DISS outlet features High quality ball valve Painted steel rough-in box 2” Inlet & outlet pressure gauges Gas Control Panel