1 / 34

BMFR 4113 – CAD/CAM

BMFR 4113 – CAD/CAM. LECTURE 5 INTRODUCTION TO MODELLING SYSTEM. Learning Objectives. Recognize the basic facilities available in one of a high end CAD systems. Learn the basic use of parametric modelling system in a particular software. Major CAD/CAM systems.

annick
Download Presentation

BMFR 4113 – CAD/CAM

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. BMFR 4113 – CAD/CAM LECTURE 5 INTRODUCTION TO MODELLING SYSTEM

  2. Learning Objectives • Recognize the basic facilities available in one of a high end CAD systems. • Learn the basic use of parametric modelling system in a particular software.

  3. Major CAD/CAM systems. 􀀃 Unigraphics 􀀃 Pro Engineer 􀀃 CATIA 􀀃 I-DEAS The modelling methods that are embedded within most major CADCAM systems are: 􀀃 Solid Modelling 􀀃 Surface Modelling 􀀃 Wire frame Modelling 􀀃 Feature-Based Modelling

  4. 7.1 Typical CADs general facilities Fig. 7.1 The Unigrpahics screen appearance before starting the modelling.

  5. CATIA

  6. Geometric Facilities in CATIA

  7. Geometric Facilities in Unigraphics

  8. 7.2 Solid Modelling Example 1

  9. Example 2

  10. Example 3

  11. Drafting

  12. EXAMPLE –step by step

  13. Assembly

  14. Assembly - Example 2

  15. Assembly - Exploded Components

  16. The end

More Related