1 / 18

Animation (FINALLY!!!)

Animation (FINALLY!!!). CGDD 4113. References. Don’t start with a file. Instead, use a reference … Leaves the original “untouched” File->New Scene File->Create Reference->□ Preference all nodes with “ romeo ” under Name Clash Options. Set up your Views.

idra
Download Presentation

Animation (FINALLY!!!)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Animation(FINALLY!!!) CGDD 4113

  2. References • Don’t start with a file. Instead, use a reference… • Leaves the original “untouched” • File->New Scene • File->Create Reference->□ • Preference all nodes with “romeo” under Name Clash Options

  3. Set up your Views • Panels->Layouts->Two Panes Stacked. Turn off NURBS and Polygons

  4. Sliding Feet • Set your time range • Start time and Playback Time to 0 • End Time and Playback Time to 20 • Two steps, each 10 frames • Set the Active Character • Very important! • Allows you to set keys for Romeo

  5. Sliding Feet • Position feet • lFootManip translate Z 9 units, set Roll = -5.0 • rFootManip translate Z 0, Roll = 10.0 • Pelvis translate Z 5 • Move down until knees bend • Leave arms • Set a key using “s”

  6. Sliding Feet • Do the same for the right foot: • Go to frame 10 • Select rFootManip • Translate Z 18, Roll = -5 • Set lFootManip Roll = 10 • Translate Pelvis Z 14 • Set key using “s” • Notice that the values double!

  7. Sliding Feet • Frame 20: • lFootManip translate Z to 27, Roll = -5.0 • rFootManipRool = 10 • Pelvis Z = 23 • Set key • See the pattern?

  8. Animation Curves • Window->Animation Editors->Graph Editor

  9. Edit the Curve Tangents • Tangents->Flat • Can be modified in the Animation Preferences window

  10. Lifting the Feet • Raise rFootManip up 1 at frame 5 • Raise lFootManip up 1 at frame 15

  11. Rotating the Pelvis(Top View) • Frame 0, rotate pelvis -10 degrees • Frame 10, rotate pelvis 10 degrees

  12. Rotating the Pelvis(Front View) • At frame 5 • translate the pelvis 0.5 • Rotate the Y axis -3 degrees • At frame 15 • translate the pelvis 0.5 • Rotate the Y axis -3 degrees

  13. The Current Graph Editor(For Translate/Rotate X)

  14. Adding Bounce • Translate Y attribute of Pelvis • Insert new keys manually

  15. Making the Feet Pound • Insert two more keys for lFootManip • Frame 2, Roll = 0 • Frame 5, Roll = 0 • Insert two more keys for rFootManip • Frame 12, Roll = 0 • Frame 15, Roll = 0

  16. Animating the Arms • Drop the clavicles (in the skeleton) by -10 degrees • Lower the hand manipulators • Rotate the hand manipulators • Rotate the fingers • Copy keys (again) using very odd MMB+drag

  17. Cycling the Animation • Set the End Time and Playback End Time to 300 • Open the Graph Editor

  18. Playing with Infinity • View->Infinity • Curves->Pre Infinity->Cycle with Offset

More Related