1 / 74

Sampling and Reconstruction

Sampling and Reconstruction The impulse response of an continuous-time ideal low pass filter is the inverse continuous Fourier transform of its frequency response Let H lp (jw) be the frequency response of the ideal low-pass filter with the cut-off frequency being w s /2.

antonelli
Download Presentation

Sampling and Reconstruction

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Sampling and Reconstruction The impulse response of an continuous-time ideal low pass filter is the inverse continuous Fourier transform of its frequency response Let Hlp(jw) be the frequency response of the ideal low-pass filter with the cut-off frequency being ws/2.

  2. Remember that when we sample a continuous band-limited signal satisfying the sampling theorem, then the signal can be reconstructed by ideal low-pass filtering.

  3. The sampled continuous-time signal can be represented by an impulse train: Note that when we input the impulse function (t) into the ideal low-pass filter, its output is its impulse response When we input xs(t) to an ideal low-pass filter, the output shall be • It shows that how the continuous-time signal can be reconstructed by interpolating the discrete-time signal x[n].

  4. Properties: hr(0) = 1; hr(nT) = 0 for n=1, 2, …; It follows that xr(mT) = xc(mT), for all integer m. The form sin(t)/t is referred to as a sinc function. So, the interpolant of ideal low-pass function is a sinc function.

  5. Illustration of reconstruction

  6. Ideal discrete-to-continuous (D/C) converter • It defines an ideal system for reconstructing a bandlimited signal from a sequence of samples.

  7. Ideal low pass filter is non-causal • Since its impulse response is not zero when n<0. Ideal low pass filter can not be realized • It can not be implemented by using any difference equations. Hence, in practice, we need to design filters that can be implemented by difference equations, to approximate ideal filters.

  8. Z-Transform • Discrete-time Fourier Transform • z-transform: polynomial representation of a sequence

  9. Z-Transform (continue) • Z-transform operator: • The z-transform operator is seen to transform the sequence x[n] into the function X{z}, where z is a continuous complex variable. • From time domain (or space domain, n-domain) to the z-domain

  10. Bilateral vs. Unilateral • Two sided or bilateral z-transform • Unilateral z-transform

  11. Example of z-transform

  12. Relationship to the Fourier Transform • If we replace the complex variable z in the z-transform by ejw, then the z-transform reduces to the Fourier transform. • The Fourier transform is simply the z-transform when evaluating X(z) only in a unit circle in the z-plane. • From another point of view, we can express the complex variable z in the polar form as z = rejw. With z expressed in this form,

  13. Relationship to the Fourier Transform (continue) • In this sense, the z-transform can be interpreted as the Fourier transform of the product of the original sequence x[n] and the exponential sequence rn. • For r=1, the z-transform reduces to the Fourier transform. The unit circle in the complex z plane

  14. Relationship to the Fourier Transform (continue) • Beginning at z = 1 (i.e., w = 0) through z = j(i.e., w = /2) to z = 1 (i.e., w =), we obtain the Fourier transform from 0 w  . • Continuing around the unit circle in the z-plane corresponds to examining the Fourier transform from w =  to w = 2. • Fourier transform is usually displayed on a linear frequency axis. Interpreting the Fourier transform as the z-transform on the unit circle in the z-plane corresponds conceptually to wrapping the linear frequency axis around the unit circle.

  15. Convergence Region of Z-transform • The sum of the series may not be converge for all z. • Region of convergence (ROC) • Since the z-transform can be interpreted as the Fourier transform of the product of the original sequence x[n] and the exponential sequence rn, it is possible for the z-transform to converge even if the Fourier transform does not. • Eg., x[n] = u[n] is absolutely summable if r>1. This means that the z-transform for the unit step exists with ROC |z|>1.

  16. ROC of Z-transform • In fact, convergence of the power series X(z) depends only on |z|. • If some value of z, say z = z1, is in the ROC, then all values of z on the circle defined by |z|=| z1| will also be in the ROC. • Thus the ROC will consist of a ring in the z-plane.

  17. ROC of Z-transform – Ring Shape

  18. Analytic Function and ROC • The z-transform is a Laurent series of z. • A number of theorems from the complex-variable theory can be employed to study the z-transform. • A Laurent series, and therefore the z-transform, represents an analytic function at every point inside the region of convergence. • Hence, the z-transform and all its derivatives exist and must be continuous functions of z with the ROC. • This implies that if the ROC includes the unit circle, the Fourier transform and all its derivatives with respect to w must be continuous function of w.

  19. Z-transform and Linear Systems • First, we analyze the Z-transform of a causal FIR system • The impulse response is • Take the z-transform on both sides

  20. Z-transform of Causal FIR System (continue) • Thus, the z-transform of the output of a FIR system is the product of the z-transform of the input signal and the z-transform of the impulse response.

  21. y[n] Y(z) x[n] X(z) h[n] H(z) Z-transform of Causal FIR System (continue) • H(z) is called the system function (or transfer function) of a (FIR) LTI system.

  22. V(z) Y(z) Y(z) Y(z) X(z) X(z) H2(z) H1(z) H1(z) V(z) H2(z)  Y(z) X(z) H1(z)H2(z)  Multiplication Rule of Cascading System

  23. Example • Consider the FIR system y[n] = 6x[n]  5x[n1] + x[n2] • The z-transform system function is

  24. z1 Delay of one Sample • Consider the FIR system y[n] = x[n1], i.e., the one-sample-delay system. • The z-transform system function is

  25. zk Delay of k Samples • Similarly, the FIR system y[n] = x[nk], i.e., the k-sample-delay system, is the z-transform of the impulse response [n  k].

  26. + + + + + + + + b0 b0 TD TD TD z1 z1 z1 x[n] x[n] y[n] y[n] b1 b2 bM bM b2 b1 x[n-1] x[n-1] x[n-2] x[n-2] x[n-M] x[n-M] System Diagram of A Causal FIR System • The signal-flow graph of a causal FIR system can be re-represented by z-transforms.

  27. Z-transform of General Difference Equation (IIR system) • Remember that the general form of a linear constant-coefficient difference equation is • When a0is normalized to a0= 1, the system diagram can be shown as below for alln

  28. + + + + + + + + x[n] y[n] b0 TD TD TD TD TD TD bM b1 b2  a1  a2  aN y[n-1] x[n-1] x[n-2] y[n-2] y[n-N] x[n-M] Review of Linear Constant-coefficient Difference Equation

  29. + + + + + + + + X(z) Y(z) b0 z1 z1 z1 z1 z1 z1 b1 bM b2  a1  aN  a2 Z-transform of Linear Constant-coefficient Difference Equation • The signal-flow graph of difference equations represented by z-transforms.

  30. Z-transform of Difference Equation (continue) • From the signal-flow graph, • Thus, • We have

  31. Z-transform of Difference Equation (continue) • Let • H(z) is called the system function of the LTI system defined by the linear constant-coefficient difference equation. • The multiplication rule still holds: Y(z) = H(z)X(z), i.e., Z{y[n]} = H(z)Z{x[n]}. • The system function of a difference equation (or a generally IIR system) is a rational formX(z) = P(z)/Q(z). • Since LTI systems are often realized by difference equations, the rational form is the most common and useful for z-transforms.

  32. Z-transform of Difference Equation (continue) • When ak = 0 for k = 1 … N, the difference equation degenerates to a FIR system we have investigated before. • It can still be represented by a rational form of the variable z as

  33. System Function and Impulse Response • When the input x[n] = [n], the z-transform of the impulse response satisfies the following equation: Z{h[n]} = H(z)Z{[n]}. • Since the z-transform of the unit impulse [n] is equal to one, we have Z{h[n]} = H(z) • That is, the system function H(z) is the z-transform of the impulse response h[n].

  34. Z-transform vs. Convolution • Convolution • Take the z-transform on both sides:

  35. Z-transform vs. Convolution (con’t) Time domain convolution implies Z-domain multiplication

  36. Y(z) (= H(z)X(z)) Z-transform Fourier transform X(z) H(z)/H(ejw) X(ejw) Y(ejw) (= H(ejw)X(ejw)) System Function and Impulse Response (continue) • Generally, for a linear system, y[n] = T{x[n]} • it can be shown that Y{z} = H(z)X(z). where H(z), the system function, is the z-transform of the impulse response of this system T{}. • Also, cascading of systems becomes multiplication of system function under z-transforms.

  37. Poles and Zeros • Pole: • The pole of a z-transform X(z) are the values of z for which X(z)= . • Zero: • The zero of a z-transform X(z) are the values of z for which X(z)=0. • When X(z) = P(z)/Q(z) is a rational form, and both P(z) and Q(z) are polynomials of z, the poles of are the roots of Q(z), and the zeros are the roots of P(z), respectively.

  38. Examples • Zeros of a system function • The system function of the FIR system y[n] = 6x[n]  5x[n1] + x[n2] has been shown as • The zeros of this system are 1/3 and 1/2, and the pole is 0. • Since 0 and 0 are double roots of Q(z), the pole is a second-order pole.

  39. Example: Finite-length Sequence (FIR System) Given Then There are the N roots of zN = aN, zk = aej(2k/N). The root of k = 0 cancels the pole at z=a. Thus there are N1 zeros, zk = aej(2k/N), k = 1 …N, and a (N1)th order pole at zero.

  40. Pole-zero Plot

  41. Example: Right-sided Exponential Sequence • Right-sided sequence: • A discrete-time signal is right-sided if it is nonzero only for n0. • Consider the signal x[n] = anu[n]. • For convergent X(z), we need • Thus, the ROC is the range of values of z for which |az1| < 1 or, equivalently, |z| > a.

  42. : zeros  : poles Gray region: ROC Example: Right-sided Exponential Sequence (continue) • By sum of power series, • There is one zero, at z=0, and one pole, at z=a.

  43. Example: Left-sided Exponential Sequence • Left-sided sequence: • A discrete-time signal is left-sided if it is nonzero only for n  1. • Consider the signal x[n] = anu[n1]. • If |az1| < 1 or, equivalently, |z| < a, the sum converges.

  44. Example: Left-sided Exponential Sequence (continue) • By sum of power series, • There is one zero, at z=0, and one pole, at z=a. The pole-zero plot and the algebraic expression of the system function are the same as those in the previous example, but the ROC is different.

  45. Hence, to uniquely identify a sequence from its z-transform, we have to specify additionally the ROC of the z-transform. Another example: given Then

  46. Thus

  47. Consider another two-sided exponential sequence Given Since and by the left-sided sequence example

  48. Again, the poles and zeros are the same as the previous example, but the ROC is not.

  49. Some Common Z-transform Pairs

More Related