1 / 35

Status report on MicroMegas mechanics

Status report on MicroMegas mechanics. CERN PH/DT. Content. Concept remind Vacuum table manufacturing and measurements MM panels design Future plans. Concept (1/2). A sandwich of two soft skin is glued without mechanical constraints. A sandwich is: One glass fibre skin (0.5mm)

aquene
Download Presentation

Status report on MicroMegas mechanics

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Status report on MicroMegas mechanics CERN PH/DT Jordan Degrange / Francisco Perez Gomez CERN PH/DT

  2. Content • Concept remind • Vacuum table manufacturing and measurements • MM panels design • Future plans Jordan Degrange / Francisco Perez Gomez CERN PH/DT

  3. Concept (1/2) • A sandwich of two soft skin is glued without mechanical constraints. • A sandwich is: • One glass fibre skin (0.5mm) • Aluminium honeycomb surrounded with an aluminium frame • Second glass fibre skin (0.5mm) • Sandwich schematic view Jordan Degrange/Francisco Perez Gomez PH/DT

  4. Concept (2/2) • Manufacturing concept • The skins are sucked with two vacuum tables • The vacuum table surfaces are perfectly flat • The vacuum table surfaces are set in parallel position Jordan Degrange / Francisco Perez Gomez PH/DT

  5. Vacuum table components • Dimensions: 1300X600 • Manufactured at CERN • Outer surface: Epoxy gel coat ‘’EP Gel coat Weiβ’’ (1+1 reinforced layer). • Structural layer: Glass fibre “Glasgewebe 92150 FK-144 345g/m2 Leinwand’’ + AXSON Epolam 5015 (5 layers). • 4 perforated sides aluminium honeycomb. • Araldite 2011

  6. Vacuum table exploded view Gel coat + Glass fibre (3.5mm) Perforated Al Honeycomb (60mm) Glass fibre (3mm) Al profile (60X30mm) Al inserts (Ø40mm) Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  7. MM Vacuum table (1300mmX600mmX60mm) Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  8. Vacuum Table Cross section Perforated Al honeycomb Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  9. Vacuum table inserts Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  10. Vacuum table QC • Temperature: 20°C • Planarity : 0.077mm • Temperature : 21°C • Planarity : 0.08mm • Temperature : 22.5°C • Planarity : 0.03mm • There’s a temperature influence on flatness to be investigated. CERN Metrology lab CERN PH/DT Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  11. MM panel Design • Reference holes on boards for alignment • Ultem plugs to avoid drilling panels after assembly • All plugs are precisely pre-glued on the board using a dedicated tool • Aluminium frame pre-assembled on tool • Aluminium honeycomb • Araldite 2011 is the best candidate for gluing • Panel manufacturing in one shot Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  12. Assembly tool 4 referenceholes. Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  13. Board on Assembly tool Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  14. Board alignment 4 referenceholes. Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  15. Board alignment 2pins Ø5g6 X Ø5,5g6 Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  16. Board Alignment Ref. Ref. Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  17. Reference plugs gluing Ø5.50 Ø5.0 Ø5.50 Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  18. PCB Alignment Alignment pin Reference plug glued Cyanoacrylate 3M EC100 Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  19. All plugs glued BoardAlignement Ref. Spacer Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  20. Board installation on Vacuum table Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  21. Board indexation Ref. … vacuum pump ON Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  22. Aluminium frame assembly Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  23. Aluminium frame assembly 2 referenceholes per profile Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  24. Aluminium frame installation Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  25. Honeycomb installation Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  26. 2nd board installation on 2nd VT Ref. Ref. Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  27. Vacuum Tables alignment Vacuum Table Ref. Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  28. Vacuum tables alignment Precision shims (11,4mm) Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  29. Polymerisation Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  30. Mesh support frame • Assembled and glued on drift panel using alignment holes • Mesh glued on well defined surface. • Acts as gas manifold. • Large gluing area. • Ground connection Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  31. Mesh support frame Ground connection holes Gas IN/OUT Joint groove Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  32. Mesh support frame Cleaning channel Gas distribution holes (Ø0.5mmØ1.5mm) Gas distribution channel Surface glued on drift panel Gas IN/OUT (Ø2,5mm) Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  33. Board connection Fixation pins and ground connection Board Alignment pin Deflection = 0.01mm Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  34. View of Zebra connector encapsulated Jordan Degrange - Francisco Perez Gomez CERN PH/DT

  35. Future plans and tasks 15.01.14 • Prepare all needed elements for 1 panel assembly (frame, plugs, pins, etc..) • Manufacturing of 1 full set of mesh support. • Investigation of temperature and humidity influence on VT flatness • Drill reference holes on vacuum tables. • Assembly and QC of 1 panel for tooling and procedure validation • Test on gas distribution • Test on mesh gluing • Ground connections tests • Test on zebra fixation • Electrical tests on Zebra connectors Francisco Perez Gomez / Hans Danielsson CERN PH/DT/EM2

More Related