1 / 10

Bruce Mayer, PE Licensed Electrical & Mechanical Engineer BMayer@ChabotCollege

Engineering 45. Final Exam Review. Bruce Mayer, PE Licensed Electrical & Mechanical Engineer BMayer@ChabotCollege.edu. P13.14 Advice. The Following Problem is Very SIMILAR to Problem 13.14 , but it is NOT the Same The Numbers were Changed to Protect the Innocent. 1N. SLG. 100 mm. 5 mm.

aren
Download Presentation

Bruce Mayer, PE Licensed Electrical & Mechanical Engineer BMayer@ChabotCollege

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Engineering 45 FinalExamReview Bruce Mayer, PE Licensed Electrical & Mechanical EngineerBMayer@ChabotCollege.edu

  2. P13.14 Advice • The Following Problem is Very SIMILAR to Problem 13.14, but it is NOT the Same • The Numbers were Changed to Protect the Innocent

  3. 1N SLG 100 mm 5 mm 1 N Problem 13.14 SetUp • Problem → • SodaLime Glass (SLG) Loaded as Shown at Right • Find Using Fig 13.7 the Max-Temperature if the allowed extension is 1mm over the course of a week’s time

  4. Use the η – ε – σ Reln • The Viscosity Reln • Where • η ≡ Viscosity • σ ≡ Tensile Stress • ε ≡ Tensile Strain

  5. Use Fig 13.7 490 °C • Thus at η = 3.08x1012 Pa•S: T = 490 °C

  6. P14.25 Advice • The Follow Problem is Very SIMILAR to Problem 14.25, but it is NOT the Same • The Numbers were Changed to Protect the Innocent

More Related