491 likes | 3.09k Views
TOPOGRAPHY ORBSCAN. S.A.A. Mortazavi MD. Associate Professor of Ophthalmology Isfahan University of Medical Sciences. ORBSCAN SYSTEM. Use the principle of projection
E N D
TOPOGRAPHYORBSCAN S.A.A. Mortazavi MD. Associate Professor of Ophthalmology Isfahan University of Medical Sciences
ORBSCAN SYSTEM • Use the principle of projection • Forty scanning slit beams (20 from the left and 20 from the right with up to 240 data points per slit ) to scan the cornea and measure independently the X,Y & Z locations
Orbscan imaging • Forty slit images are acquired in two 0.7 second periods • Each of the 40 slit images triangulates one slice of ocular surface • Distance between data slices average 250 microns
ORBSCAN • Orbscan I only slit scan topography • Orbscan II the placidodisc added in orbscan I
ORBSCAN • The images used to construct the anterior corneal surface,posterior corneal surface,anterior iris and anterior lens surfaces • Data regarding the corneal pachymetry and anterior chamber depth
BEST FIT SPHERE (BFS) • The computer calculates a hypothetical sphere that matches as close as possible to the actual corneal shape being measured • Compares the real surface to the hypothetical sphere showing areas above the surface of the sphere in warm colours and areas below the surface in cool colours
NORMAL BAND SCALE • Highlights the abnormal areas in the cornea in orange to red colors • The normal areas are all shown in green • Helpful in generalized screening in preoperative examination
AXIAL MAP • To create a good quality corneal flap in LASIK if either extremes (too steep or too flat) is the case, this can lead to surgical flap complications • K readings of more than 48 D are an indication of potential keratoconus
PACHYMETRY MAP • The orbscan measures thickness from the tear film layer to descemet’s membrane and is thicker than that obtained with ultrasound • Adjustment factor (acoustic factor) ,the default setting is 92% • Provides a reading showing the thinnest point of the cornea that may not necessarily be the central reading
PACHYMETRY MAP • Thinnest point <470 micron • In pathological corneas, thinnest point is often displaced inferotemporal • Difference of >100 microns from the thinnest point to the values at 7mm optical zone
ELEVATION MAP • The green colour is referred as refrence sphere (at sea level ) • The warmer colours are above this level and the cooler colours are below
ELEVATION DATA • The difference between the highest and lowest points is a potential keratoconus indicator if over 100 microns (Rousch criteria)
POSTERIOR ELEVATION MAP • Many surgeons think the first sign of keratoconus appears on the posterior surface of the cornea • 3.13% of population screened for laser surgery had posterior ectasia criteria by orbscan , despite having axial topography classified as normal
POSTERIOR ELEVATION MAP • A best fit sphere (BFS) >55D on the posterior profile , indicative of posterior ectasia • Greater than 50 micron generally accepted as abnormal • In corneas thinner than normal over 40 as abnormal
Orbscan diagnostic parameters for K.C • Post BFS >55D • Difference pachymetry between thinest point & thickest point in 7 mm zone >100 µ • Diff >45µ • Mean k >47 D • I-S index >1.5D • Distance from corneal apex to thinest point >0.9 mm • Thinest point <470 µ
Risks of ectasia indices • Number of abnormal maps • Posterior float difference >0.050 • 3mm & 5mm irregularity • Peripheral thickness changes • Astigmatism variance between eyes • Steep k’s –mean power map
Three step rule • One abnormal map ; perform with caution • Two abnormal map ; with concern • Three abnormal map ;contraindicated
ضمن عرض پوزش بدلیل حجم بالای LECTUER ادامه اسلایدها امکان پذیر نمیباشد در صورت نیاز به ادامه لطفا به واحد سمعی و بصری مرکز آموزشی درمانی فیض مراجعه و یا با شماره تلفن 03114476010 داخلی 392تماس حاصل نمائید با تشکر