Download
1 / 20
E N D
9. . Sub-forms are secondary forms that do not appear on the Transaction Overview page until the main transmittal form has been filled out and validated. You must indicate in Section B of the main eDEP Transmittal Form that you are submitting an RMR form. When the validation step for the main form is completed, the RMR is then available to fill out.. Sub-forms are secondary forms that do not appear on the Transaction Overview page until the main transmittal form has been filled out and validated. You must indicate in Section B of the main eDEP Transmittal Form that you are submitting an RMR form. When the validation step for the main form is completed, the RMR is then available to fill out.
16. RMR Part B � Additional Instructions (cont.) For Concentration Units, indicate mg/L or ug/L for water, and either mg/m3 or ug/m3, or ppmv or ppbv for air/vapor measurements.
For effluent readings as concentrations, the % by volume of the gas as measured by the explosivity meter can be�expressed as parts per million by volume (e.g., 2% equals 20,000 ppmv).�
In places where RMR Part B does not allow input of specific information (such as values for acenapthalene and pH), the option is to check off Section G5�on the RMR Part A to upload additional information and attach it to the form.��
19. BWSC105 and RMR Forms Complete, Files Attached, Form Signed and Ready to Submit
20. Questions and Answers Please send an email to:
BWSC.eDEP@state.ma.us
Or call:
617-556-1100
