1 / 8

Shielded Metal Arc Welding 2F position

Shielded Metal Arc Welding 2F position. Using 7018 and 6010 Electrodes. 7018 T-Joint. Single Pass 1/8 7018 115 amps DCEP polarity. Correct Rod Angle. The rod should be at a 45 degree angle to the joint. Correct Travel Angle.

Download Presentation

Shielded Metal Arc Welding 2F position

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Shielded Metal Arc Welding 2F position Using 7018 and 6010 Electrodes

  2. 7018 T-Joint • Single Pass 1/8 7018 115 amps DCEP polarity

  3. Correct Rod Angle • The rod should be at a 45 degree angle to the joint.

  4. Correct Travel Angle • The travel angle should be about 60 degrees from the horizontal plate on the joint.

  5. 7018 Multi -Pass • This is a multi-pass made with 3 beads showing. It has a 2 bead multi-pass under it and a single pass under those.

  6. Multi-Pass Rod Angle • These pictures show the rod angle for the final 3 passes. 1st-Pass

  7. Multi-Pass Rod Angle • 2nd- Pass

  8. Multi-Pass Rod Angle • 3rd- Pass

More Related