1 / 22

CTC 450 Review

CTC 450 Review. Energy Equation Pressure head Velocity head Potential energy Pumps, turbines Head losses due to friction. Objectives. Know how to calculate friction loss using the Darcy-Weisbach equation Know how to calculate other head losses.

axel-keller
Download Presentation

CTC 450 Review

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CTC 450 Review • Energy Equation • Pressure head • Velocity head • Potential energy • Pumps, turbines • Head losses due to friction

  2. Objectives • Know how to calculate friction loss using the Darcy-Weisbach equation • Know how to calculate other head losses

  3. Studies have found that resistance to flow in a pipe is • Independent of pressure • Linearly proportional to pipe length • Inversely proportional to some power of the pipe’s diameter • Proportional to some power of the mean velocity • If turbulent flow, related to pipe roughness • If laminar flow, related to the Reynold’s number

  4. Head Loss Equations • Darcy-Weisbach • Theoretically based • Hazen Williams • Frequently used-pressure pipe systems • Experimentally based • Chezy’s (Kutter’s) Equation • Frequently used-sanitary sewer design • Manning’s Equation

  5. Darcy-Weisbach hf=f*(L/D)*(V2/2g) Where: f is friction factor (dimensionless) and determined by Moody’s diagram (PDF available on Angel) L/D is pipe length divided by pipe diameter V is velocity g is gravitational constant

  6. For Class Use Only: Origin Not Verified!!!

  7. For Class Use Only: Origin Not Verified!!!

  8. Problem Types • Determine friction loss • Determine flow • Determine pipe size • Some problems require iteration (guess f, solve for v, check for correct f)

  9. Example Problems PDF’s are available on Angel: • Determine head loss given Q (ex 10.4) • Find Q given head loss (ex 10.5) • Find Q (iteration required) (ex 10.6)

  10. Find Head Loss Per Length of Pipe • Water at a temperature of 20-deg C flows at a rate of 0.05 cms in a 20-cm diameter asphalted cast-iron pipe. What is the head loss per km of pipe? • Calculate Velocity (1.59 m/sec) • Compute Reynolds’ # and ks/D (3.2E5; 6E-4) • Find f using the Moody’s diagram (.019) • Use Darcy-Weisbach(head loss=12.2m per km of pipe)

  11. For Class Use Only: Origin Not Verified!!!

  12. Find Q given Head Loss • The head loss per km of 20-cm asphalted cast-iron pipe is 12.2 m. What is Q? • Can’t compute Reynold’s # so calculate Re*f1/2 (4.4E4) • Compute ks/D (6E-4) • Find f using the Moody’s diagram (.019) • Use Darcy-Weisbach & solve for V (v=1.59 m/sec) • Solve Q=V*A (Q=.05 cms)

  13. For Class Use Only: Origin Not Verified!!!

  14. Find Q: Iteration Required Similar to another problem we did previously; however, in this case we are accounting for friction in the outlet pipe

  15. Iteration • Compute ks/D (9.2E-5) • Apply Energy Equation to get the Relationship between velocity and f • Iterate (guess f, calculate Re and find f on Moody’s diagram. Stop if solution matches assumption. If not, assume your new f and repeat steps).

  16. Iterate

  17. Other head losses • Inlets, outlets, fittings, entrances, exits • General equation is hL=kV2/2g • where k is a fitting loss coefficient (see Table 4-1, page 76 of your book)

  18. Head Loss of Abrupt Expansion • (v1-v2)2 / 2g • Not v12-v22 • If v2=0 (pipe entrance into tank or reservoir) then the fitting loss coefficient is 1

  19. Hazen-Williams • Q=0.283CD2.63S0.54 • Q is discharge in gpm • C is coefficient, see Table 4-2 ,page 76 • D is pipe diameter in inches • S is hydraulic gradient

  20. Manning’s Equation-English Q=AV=(1.486/n)(A)(Rh)2/3S1/2 Where: Q=flow rate (cfs) A=wetted cross-sectional area (ft2) Rh=Hydraulic Radius=A/WP (ft) WP=Wetter Perimeter (ft) S=slope (ft/ft) n=friction coefficient (dimensionless)

  21. Manning’s • How would you estimate friction loss?

  22. Next class • Hardy-Cross method for determining flow in pipe networks

More Related