1 / 13

CE 578 Highway Traffic Operations

CE 578 Highway Traffic Operations. Lecture 21: Freeway Ramps and Ramp Junctions Diverge Areas. Objectives. Basic concepts Important variables Relate to merge areas. Basic Concepts. Volume v 12 Capacities Total departing Prior to deceleration lane Downstream legs

banyan
Download Presentation

CE 578 Highway Traffic Operations

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. CE 578 Highway Traffic Operations Lecture 21: Freeway Ramps and Ramp Junctions Diverge Areas Michael Dixon

  2. Objectives • Basic concepts • Important variables • Relate to merge areas Michael Dixon

  3. Basic Concepts • Volume v12 • Capacities • Total departing • Prior to deceleration lane • Downstream legs • Determine influence area flow density Michael Dixon

  4. Important Variables • LD • VR • VD • VU • V12 • VF • VFO Michael Dixon

  5. Important Variables (cont.) Michael Dixon

  6. Important Variables (cont.) Michael Dixon

  7. Relation to Merge Area Procedure • Estimate V12 using V12 = VR + (VF – VR)*PFD Michael Dixon

  8. Ramp Sequence Scenarios Michael Dixon

  9. Ramp Sequence Scenarios (cont.) • Ramps with no affect--- • Upstream on-ramp: • Downstream off-ramp: • Both Upstream on-ramp and Downstream off-ramp: • Use for LEQ of upstream on-ramp • Use for LEQ of downstream off-ramp Michael Dixon

  10. Capacity Comparisons Michael Dixon

  11. Capacity Comparisons (cont.) • Estimate and compare capacities (___________________________) • Maximum flow that can depart (upstream mainline capacity (___________) • Maximum upstream flow in lanes 1 and 2 prior to deceleration lane (___________) • Maximum flow on downstream lanes • (______________) • (______________) Michael Dixon

  12. Michael Dixon

  13. Determining LOS • Calculate diverge area density: DR = 4.252 + 0.0086v12 – 0.009LD • Use same LOS table Michael Dixon

More Related