1 / 28

Bezel Setting

Bezel Setting. The Dime AND PENNY. MAKE A Bezel Cup. Measure some Bezel wire around a coin. Mark and Cut. File the cut ends, and then, fit together. Set Solder, flux, then solder. Round on a mandrel, check for fit. Mark & cut back-plate, Set solder.

barrett-sharp
Download Presentation

Bezel Setting

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Bezel Setting

  2. The Dime AND PENNY

  3. MAKE A Bezel Cup

  4. Measure some Bezel wire around a coin

  5. Mark and Cut

  6. File the cut ends, and then, fit together

  7. Set Solder, flux, then solder

  8. Round on a mandrel, check for fit.

  9. Mark & cut back-plate, Set solder

  10. Flux, then solder

  11. Cut excess metal off, then file smooth.

  12. Make a ½ round band,………… file or sand a flat spot

  13. Set bezel cup & band in a third hand

  14. Heat from the interior until solder melts

  15. Clean, Sand, & Light Buff. Add paper to cushion and raise

  16. Use burnisher or bezel pusher to bend bezel over the top of the coin or stone.

  17. The finished work

  18. The bezel coin

  19. end

More Related