1 / 18

PREPARING SOLUTIONS AND REAGENTS II

PREPARING SOLUTIONS AND REAGENTS II. SOLUTIONS WITH MORE THAN ONE SOLUTE. RECIPE I Na 2 HPO 4 6 g KH 2 PO 4 3 g 0.4% glycerol 10 mL Dissolve in water. Bring to a volume of 1 liter. Recipe lists amounts of solutes. RECIPE II 1 M MgCl 2 0.1 M Tris

bbowman
Download Presentation

PREPARING SOLUTIONS AND REAGENTS II

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PREPARING SOLUTIONS AND REAGENTS II

  2. SOLUTIONS WITH MORE THAN ONE SOLUTE RECIPE I Na2HPO4 6 g KH2PO4 3 g 0.4% glycerol 10 mL Dissolve in water. Bring to a volume of 1 liter. Recipe lists amounts of solutes.

  3. RECIPE II 1 M MgCl2 0.1 M Tris Gives the final concentration of each solute. You must calculate the amount of each to use.

  4. A RECIPE WITH MULTIPLE SOLUTES, SM BUFFER SM BUFFER 0.1 M NaCl 1 mM MgSO4 0.2 M Tris, pH 7.5 0.01% gelatin

  5. STRATEGY 1: PREPARING SM BUFFER WITHOUT STOCK SOLUTIONS, OVERVIEW: • Prepare a solution of 0.2 M Tris, pH 7.5. • Calculate grams of each of the other solutes required. • Weigh out solutes and dissolve directly in Tris buffer.

  6. STRATEGY 1 1. Decide how much buffer to make, for example, 1 liter. 2. 1 liter of 0.2 M Tris requires 24.2 g of Tris base. (MW = 121.1 g/mole.) 3. Dissolve Tris in about 700 mL of water and bring pH to 7.5. Do not bring Tris to volume.

  7. 4. 1 liter of 0.1 M NaCl requires 5.84 g of NaCl. Add this to Tris buffer. 5. 1 liter of 1 mM MgSO4 requires 1/1000 of its MW. MgSO4 comes in more than one hydrated form; read container to determine MW. Weigh out correct amount. Add it to Tris buffer.

  8. 6. 0.01% gelatin is 0.1 g in 1 L. Weigh out and add to Tris buffer. 7. Stir to dissolve. 8. BTV 1 L 9. Record pH.

  9. STRATEGY 2: PREPARING SM BUFFER WITH STOCK SOLUTIONS • In overview: • Four solutes are each prepared separately as concentrated stock solutions. • .

  10. When the four stocks are combined, they dilute one another to the proper final concentrations

  11. STEPS ARE: 1. Prepare a stock solution of Tris buffer at pH 7.5. a. No set rule as to what should be concentration of stock. b. To make 1 L of 1 M stock, dissolve 121.1 g of Tris base in about 900 mL of water. c. Bring pH to 7.5. d. BTV 1L.

  12. 2. Prepare a stock solution of magnesium sulfate, for example, 1 M. • To make 100 mL, dissolve 0.1 MW of MgSO4 in water, bring to a volume of 100 mL.

  13. Prepare a stock solution of NaCl, for example,1 M. • To make 100 mL of stock, dissolve 5.84 grams in water and BTV 100 mL.

  14. Prepare a stock solution of gelatin, for example, 1%. • Dissolve 1 g in a final volume of 100 mL of water.

  15. 5. To make the final solution, combine the right amounts of each stock. • Since this is a situation where stocks are diluted, use the C1V1 = C2V2 equation • Four times, once for each solute.

  16. For example, to calculate how much Tris stock is required: C1 V1 = C2 V2 (1 M) (?) (0.2 M) (1000 mL) ? = 200 mL

  17. SUMMARY • To make 1000 mL of SM buffer, combine: 200 mL Tris stock 1 mL MgSO4 stock 100 mL NaCl stock 10 mL Gelatin stock 7. BTV 1L; record pH.

  18. WHICH STRATEGY? • Both strategy 1 and 2 are correct. • Generally efficient to make stock solutions of frequently used solutes because weighing out chemicals is time-consuming.

More Related