Electricity & Magnetism

1. Electricity & Magnetism Static, Currents, Circuits Magnetic Fields & Electro Magnets Motors & Generators

2. Atoms… • Have neutrons, protons, and electrons. • Protons are positively charged • Electrons are negatively charged

3. Electrons… • Are located on the outer edges of atoms…they can be moved. • A concentration of electrons in an atom creates a net negative charge. • If electrons are stripped away, the atom becomes positively charged.

4. The world is filled with electrical charges: + - + + + - + - - + + + - - - + + - - -

5. What is this electrical potential called? • Static Electricity - - - - - + + + - - + +

6. Static Electricity • The build up of an electric charge on the surface of an object. • The charge builds up but does not flow. • Static electricity is potential energy. It does not move. It is stored.

7. Static Discharge… • Occurs when there is a loss of static electricity due to three possible things: • Friction - rubbing • Conduction – direct contact • Induction – through an electrical field (not direct contact)

8. Electricity that moves… • Current: The flow of electrons from one place to another. • Measured in amperes (amps) • Kinetic energy

9. How can we control currents? • With circuits. • Circuit: is a path for the flow of electrons. We use wires.

10. There are 2 types of currents: • Direct Current (DC) – Where electrons flow in the same direction in a wire.

11. There are 2 types of currents: • Alternating Current (AC) – electrons flow in different directions in a wire

12. There are 2 types of circuits: • Series Circuit: the components are lined up along one path. If the circuit is broken, all components turn off.

13. Series Circuit

14. There are 2 types of circuits: • Parallel Circuit – there are several branching paths to the components. If the circuit is broken at any one branch, only the components on that branch will turn off.

15. Parallel Circuit

16. Conductors vs. Insulators • Conductors – material through which electric current flows easily. • Insulators – materials through which electric current cannot move.

17. Conductors: Metal Water Insulators: Styrofoam Rubber Plastic Paper Examples

18. What is Resistance? • The opposition to the flow of an electric current, producing heat. • The greater the resistance, the less current gets through. • Good conductors have low resistance. • Measured in ohms.

19. What Influences Resistance? • Material of wire – aluminum and copper have low resistance • Thickness – the thicker the wire the lower the resistance • Length – shorter wire has lower resistance • Temperature – lower temperature has lower resistance

20. What is Voltage? • The measure of energy given to the charge flowing in a circuit. • The greater the voltage, the greater the force or “pressure” that drives the charge through the circuit.

21. Difference b/t Volts and Amps • Example – you could say that… • Amps measure how much water comes out of a hose. • Volts measure how hard the water comes out of a hose.

22. Ohm’s Law • Resistance = Voltage / Current • Ohms = Volts / Amps

23. Practice with Ohm’s Law

24. What is an electromagnet? • Electromagnet – a magnet made from a current bearing coil of wire wrapped around an iron or steel core.

25. What is a generator? • Generator – a machine that changes mechanical energy to electrical energy • Usually use moving magnets to create currents in coils of wire.

26. What is a motor? • Motor – a device that changes electrical energy to mechanical energy that can do work.

27. That’s It !!!!