1 / 5

Lay out of the ESA for our run.

Lay out of the ESA for our run. 2 BPMs upstream (not showed), I got the position data from a table. 2 sets of 3 BPMs each downstream (BPM3, BPM4, BPM5 which are around 13 m, and BPM9, BPM10 and BPM11 which are around 29 m away from the wakefield box.

bikita
Download Presentation

Lay out of the ESA for our run.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Lay out of the ESA for our run. 2 BPMs upstream (not showed), I got the position data from a table. 2 sets of 3 BPMs each downstream (BPM3, BPM4, BPM5 which are around 13 m, and BPM9, BPM10 and BPM11 which are around 29 m away from the wakefield box. Matlab scripts take the data from the BPMs and analyses it to calculate the kick angle in the wake box.

  2. What the scripts do: • Loads reference data (beam without wake kick) from BPMs • Computes an average reference beam position • Loads data with the wake kick from the BPMs • Computes average data beam position (in various spoiler vertical positions) • Loads R-matrices (components r33 and r34 for each BPM position needed to calculate, reconstruct, the angle at the wake box): kick = R-1 x Data • Disables flaky BPMs • Analyses the tracks • A second independent script uses the data generated by the previous scripts: • Makes 3 vectors: one for the mover mean position, another for the mean kick and a last for the errors (rms) • Does the fit to the kick values at each mover position and plots it

  3. Test performed with fake data: First create an array with positions of the mover (the spoiler vertical positions). Ydes Positions of the mover: 11 different positions with 50 pulses each. From -1 mm to 1 mm. Units in the plot: pulse # vs position in microns.

  4. Fake data without noise (8 BPMs: 2 upstream, 6 downstream). Pulse # vs vertical displacement measured by the BPM in microns. dyp without noise (dypout-dypin) Pulse # vs recontructed angle at the wake box in microradians.

  5. Fake data with 1um noise (8 BPMs: 2 upstream, 6 downstream). dyp with 1um noise (dypout-dypin) Very noisy results. The kick angles are “small” so for a BPM signal noise ~1 um probably will need more pulses (more than the 50 simulated here) per position to improve resolution.

More Related