1 / 1

ISO 13399 cutting tool parameters ½” endmill

ISO 13399 cutting tool parameters ½” endmill. LF – functional length (149.86mm) ” distance from the gauge plane to the cutting reference point” LUX – usable length maximum (82.55mm) ” maximum length of a cutting tool that can be used in a particular cutting operation”

bina
Download Presentation

ISO 13399 cutting tool parameters ½” endmill

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. ISO 13399 cutting tool parameters ½” endmill LF – functional length (149.86mm)”distance from the gauge plane to the cutting reference point” LUX – usable length maximum (82.55mm)”maximum length of a cutting tool that can be used in a particular cutting operation” LU – usable length (80mm)”recommended length of a cutting tool that can be used in a particular cutting operation“ APMX – depth of cut maximum (20.23mm)”maximum engagement of the cutting edges with the workpiece measured perpendicular to the feed motion” RE – corner radius (0.254mm)”nominal radius of a rounded corner measured in the XY-plane“ DC – cutting diameter (12.7mm)”diameter of a circle created by a cutting reference point revolving around the tool axis of a rotating tool item” DN – neck diameter (12.0mm)”diameter of that portion of a tool item body or adaptive item body that is smaller than the diameters on either side of it” LF LUX LU DN APMX RE DC

More Related