1 / 10

DEMONSTRATORS OF THE YEAR 2009

The 3-rd Work Meeting of the CBM -MPD STS Consortium “Technical challenges of the CBM and MPD Silicon Tracking Systems 2009”. DEMONSTRATORS OF THE YEAR 2009. Session # 5: Demonstrators of the year 2009 and beyond. Sortavala, Karelia, Russia. June 1 - 4, 2009.

bowie
Download Presentation

DEMONSTRATORS OF THE YEAR 2009

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. The 3-rd Work Meeting of the CBM -MPD STS Consortium“Technical challenges of the CBM and MPDSilicon Tracking Systems 2009” DEMONSTRATORS OF THE YEAR 2009 Session # 5: Demonstrators of the year 2009 and beyond Sortavala, Karelia, Russia June 1 - 4, 2009 Scientific Research Technological Institute of Instrument Engineering Kharkov, Ukraine e-mail: borshchov@kharkov.ukrtel.net

  2. DEMONSTRATOR 1-a Demonstrator 0-b connected to 1-chip readout front-end boards (FEB) through microcables with ERNI connectors on both ends FEB-1nx-gen Demonstrator 0-b Analog cable with ERNI connectors 128 lines 10-30 cm length x 4 HV lines Sortavala, June, 2009 e-mail: borshchov@kharkov.ukrtel.net

  3. DEMONSTRATOR 0-b 2 modules were manufactured on last year and the successful beam-test in Protvino (IHEP) have passed For the demonstrator 1-a the similar modules (with application the same or other baby-sensors) can be manufactured Sortavala, June, 2009 e-mail: borshchov@kharkov.ukrtel.net

  4. DEMONSTRATOR 1-b Instead of Demonstrator module 0-b, a new carrier board a CBM02B2 sensor is used. Connection microcable to detector carrying out by TAB-bonding Analog cable with ERNI connectors (to back side) 128 lines 10-30 cm length FEB-1nx-gen HV lines Analog cable with ERNI connectors (to front side) 128 lines 10-30 cm length Board carrying (for CBM02B2 sensor) Sortavala, June, 2009 e-mail: borshchov@kharkov.ukrtel.net

  5. ANALOG CABLE WITH ERNI ERNI connectors 154743 female-type 2 x 68 pins Analog cable 128 lines 10-30 cm length ERNI Flex-mount on PCB 128 lines ERNI Flex-mount on PCB 128 lines ERNI connectors 114805 male-type 2 x 68 pins Sortavala, June, 2009 e-mail: borshchov@kharkov.ukrtel.net

  6. ANALOG CABLES WITH ERNIfirst prototype • Mounting of ERNIs • to Flex-mounts. • Soldering. • 2. Mounting of soldered ERNI on Flex-mounts • to rigid board. • Gluing, soldering. Length of cable – 20 cm; Traces pitch – 110 um. TAB-bonding 128 lines 3. Ultrasonic bonding of Analog cable to Flex-mount: 128 traces/bonds. 4. Bonds protection (Glue UP-10-14). Sortavala, June, 2009 e-mail: borshchov@kharkov.ukrtel.net

  7. DEMONSTRATORS 1-cmechanical model Using of full-size CBM03/ISTC dummy sensor. Assembling of two parts of a mini ladder with micro-cables and the 4-chip front-end boards FEB with 4 n-XYTER chips CF support Analog cables (double-layer) 1024 (512x2) lines 10-30 cm length Full-size detector CBM03/ISTC Daisy-chain cables 1024 lines Full-size detectors CBM03/ISTC Sortavala, June, 2009 e-mail: borshchov@kharkov.ukrtel.net

  8. FEB WITH 4 N-XYTER CHIPSpossible design for the Demonstrator 1-c For mechanical Demonstrator 1-c the dummy FEB with use of multi-layer aluminum-polyimide board can be made Double-layer chip-cable with chip Pitch-adapter Top layer Bottom layer Alumina base Sortavala, June, 2009 e-mail: borshchov@kharkov.ukrtel.net

  9. CONCLUSIONS • The design of analog cables with ERNI connectors for Demonstrators 1-a and 1-b is developed. • The first samples of analog cables with ERNI connectors are made. • The development of a carrier-board design for Demonstrator 1-b is begun. • It is necessary to choose the FEB design for Demonstrator 1-c. • It is necessary to agree the design of mechanical support (CF) for Demonstrator 1-c. Sortavala, June, 2009 e-mail: borshchov@kharkov.ukrtel.net

  10. Thank you for your attention Sortavala, June, 2009 e-mail: borshchov@kharkov.ukrtel.net

More Related