1 / 12

SHIPTRAP - Short Introduction Control System - Project Prototyping

SHIPTRAP Control System : Project & Prototyping Ref: C. Toader H.Brand and K. Popensieker http://www-wnt.gsi.de/shiptrap/. SHIPTRAP - Short Introduction Control System - Project Prototyping Conclusions and Perspectives. The SHIPTRAP Project. Penning traps. gas cell.

boyd
Download Presentation

SHIPTRAP - Short Introduction Control System - Project Prototyping

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. SHIPTRAP Control System : Project & PrototypingRef: C. Toader H.Brand and K. Popensiekerhttp://www-wnt.gsi.de/shiptrap/ • SHIPTRAP - Short Introduction • Control System - Project • Prototyping • Conclusions and Perspectives

  2. The SHIPTRAP Project Penning traps gas cell ion cooler & buncher Magnet (7T) extraction system

  3. SHIPTRAP Facility Purification TRAP Measurement TRAP BUNCHER Gas Cell Extraction ~ 20 ~ 20 ~ 30 ~ 30 ~ 50-60 DC-Tensions DC-Tensions DC-Tensions DC-Tensions DC-Tensions ~ 2 ~ 1 ~ 2 ~ 1 HV-Tensions Function Generators Function Generators FunctionGenerators Function Generators 1 1 1 PressureControl PressureControl PressureControl ~ 15 Vacuum Monitoring

  4. Darmstadt München SHIPTRAP Device Purification TRAP Measurement TRAP TOF BUNCHER MCS Gas Cell Extraction ~ 20 ~ 20 ~ 30 ~ 30 ~ 50-60 DC-Tensions DC-Tensions DC-Tensions DC-Tensions DC-Tensions ~ 2 ~ 1 ~ 2 ~ 1 HV-Tensions Function Generators Function Generators FunctionGenerators Function Generators 1 1 1 PressureControl PressureControl PressureControl ~ 15 Vacuum Monitoring

  5. Darmstadt München Purification TRAP Measurement TRAP TOF BUNCHER MCS Gas Cell Extraction SHIPTRAP Device • Sequential Measurement Scenario • 1 Hz Synchronous Cycles • Maximum Flexibility/ INT. Choice LabView NT PC based BUS = OK !!! GPIB CAN RS + +

  6. GUI & DATA Pseudo-FAST SLOW PCI Ethernet : TCP/IP ISA / PCI Function Generator GPIB Pulse Pattern Generator RS232 GPIB CAN-Controller Vacuum control TOF/MCS DC Channels

  7. Buncher Prototype • RVC200-Balzers/Pressure Control • ACG-Edwards/Pressure Monitor • DS-345-Stanford/Freq. Generator • PPG100-B&H/Pulse pattern generator • ISEG-EHQ-F0xxy/DC-Power supply • All parameters can be saved and read from files! • Some parameters can be read directly from devices.

  8. ( Incomplete drawing !! ) Perspectives 1. The Instruments HAVE TO be controlled 2. Try to follow the NI recommendations

  9. SHIPTRAP Calendar • 25/08/99 - Kick-of the project : First Meeting between DVEE and SHIPTRAP group • 28/09/99 - Definition of prototype parameters for the RF Buncher • 14/12/99 Buncher Prototype is finished! ( > 80 % of the time on planning) • 17/06/00 Planned Prototype for The TRAPS

  10. Remarks • Good Points • It is a good base for developing DRIVERS for all the used devices. • The Prototype is actually in use for Systematic studies of transmission @ different DC; gases; pressures. • Project management procedure

  11. Problems Not enough operational experience with the devices No experience with the CAN BUS: written from scratch ! ( See ref. to the BUG 121) Project management procedure Remarks • Good Points • It is a good base for developing DRIVERS for all the used devices. • The Prototype is actually in use for Systematic studies of transmission @ different DC; gases; pressures. • Project management procedure

More Related