1 / 1

Autorotation Gear No. PV0383

d. c. a. b. e. Autorotation Gear No. PV0383 Introduction New Autorotation Gear for Raptor 60~90. This new autorotation gear is latest design without lockup problem. Durable, lightweight design make this option part meets the requirement for F3C or 3D maneuver pilots.

bracha
Download Presentation

Autorotation Gear No. PV0383

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. d. c. a. b. e. Autorotation Gear No. PV0383 Introduction New Autorotation Gear for Raptor 60~90. This new autorotation gear is latest design without lockup problem. Durable, lightweight design make this option part meets the requirement for F3C or 3D maneuver pilots. Contents a. Autorotation Hub x 1 b. Octagon One Way Clutch x 1 c. d12 x D21 x w5 Ball Bearing x 2 d. Lock Hub x 1 e. Tail Drive Spur Gear Collar x 1 One way clutch with letters should face up Assembly 1. Remove original lock ring, autorotation gear assembly from the main shaft. 2. Disassemble old autorotation gear assembly. 3. Install the Octagon One Way Clutch and two d12xD21xw5 Ball Bearings to the new Hub. You may wisely apply some grease onto the one way clutch. Note: The Octagon One Way Clutch with letters “ lock” should face up. 4. Install the new autorotation hub on main spur gear. 5. Insert the Collar in the Tail Drive Super Gear. 6. Refer to the right drawing and install the main shaft. Add the Lock Hub then the new Autorotation Hub Assembly and the Tail Drive Spur Gear. Secured the Tail Drive Spur Gear with the old M4 x 25 bolt but do not overtighten it. 7. Slide the Lock Hub all the way up until the rotor shaft has no play then secure it with two old M3 x 6 Socket Screws.

More Related