1 / 15

Thermal Expansion

Thermal Expansion. Created by: Marlon Flores Sacedon Physics section, DMPS June 2010. MFS. Most materials expand when their temperature increase. The decks of bridges need special joints and supports to allow for expansion.

brandee
Download Presentation

Thermal Expansion

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Thermal Expansion Created by: Marlon Flores Sacedon Physics section, DMPS June 2010 MFS

  2. Most materials expand when their temperature increase. • The decks of bridges need special joints and supports to allow for • expansion. • A completely filled and tightly capped bottle of water cracks when • it is heated • You can loosen a metal jar lid by running hot • water over it. . Thermal Expansion These are examples of Thermal Expansion Two Kinds of Thermal Expansion Linear Expansion Volume Expansion MFS

  3. Lo Volume Expansion T1 Linear Expansion T2 T2>T1 MFS

  4. L Lo @ T2 Where: = coef. of linear expansion (1/K) L = change in length (m) L& Lo = final & initial length (m) T2&T1= final & initial temperature (oC) Where: = coef. of volume expansion (1/K) V = change in volume (m3) V& Vo = final & initial volume (m3) T2&T1= final & initial temperature (oC) Volume Expansion Vo @ T1 T1 Linear Expansion T2 T2>T1 T2>T1 MFS

  5. Coefficients of Volume Expansion Coefficients of Linear Expansion Relationship between coefficient of volume expansion & coefficient of linear expansion MFS

  6. 50 m L = ? Ans Example 1: A surveyor uses a steel measuring tape that is exactly 50.000 m long at a temperature of 20 oC. What is its length on a hot summer day when the temperature is 35 oC? Answer: 50.009 m Lo Solution Temperature of tape @ 20oC Temperature of tape @ 35oC From table, the coefficient of linear expansion From the formula: MFS Transforming = 50.0009 m

  7. Lo = 50 m L = 50.009 m Ans Example 2: The surveyor uses the measuring tape (in Example 1) to measure a distance when the temperature is 35 oC; the value that she reads off the tape is 35.794m. What is the actual distance? Answer: 35.800 m Solution Temperature of tape @ 20oC Temperature of tape @ 35oC Let: x = actual distance @ T=35 oC

  8. Example 3: A glass flask with volume 200 cm3 is filled to the brim with mercury at 20 oC. How much mercury overflows when the temperature of the system is raised to 100 oC? The coefficient of linear expansion of the glass is 0.40x10-5 K-1. Answer: 2.7 cm3 Solution Mercury overflows ( Vover) Mercury, expanded volume( VHg) Glass flask, expanded volume ( Vglass) Mercury column Glass flask From table: Glass flask filled w/ mercury @ T1=20oC @ T2=100oC

  9. Seat Work1: The Humber Bridge in England has the world’s longest single span, 1410m in length. Calculate the change in length of steel deck of the span when the temperature increases from -5.0oC to 18.0oC. Answer: 0.39 m Seat Work2: A metal rod is 40.125 cm long at 20.0oC and 40.148 cm long at 45.0oC. Calculate the average coefficient of linear expansion of the rod for this temperature range. Answer: 2.3x10-5 (Co)-1 Seat Work3: A glass flask whose volume is 1000.00 cm3 at 0.0oC is completely filled with mercury at this temperature. When flask and mercury are warmed to 55.0oC, 8.95 cm3 of mercury overflow. If the coefficient of volume expansion of mercury is 18.0x10-5 K-1, compute the coefficient of volume expansion of the glass. Answer: 1.7x10-5 (Co)-1

  10. Assignment 1) A Pendulum shaft of a clock is made of brass. What is the fractional change in length of the shaft when it is cooled from 19.50oC to 5.00oC? Answer: -2.9x10-4 2) An underground tank with a capacity of 1700L (1.70m3) is filled with ethanol that has an initial temperature of 19.0oC. After the ethanol has cooled off to the temperature of the tank and ground, which is 10.0oC, how much air space will there be above the ethanol in the tank? (Assume that the volume of the tank doesn’t change.) Answer: 2.3x10-5 (Co)-1 3) A metal rod that is 30.0 cm long expands by 0.0650 cm when its temperature is raised from 0oC to 100oC. A rod of a different metal and of the same length expands by 0.0350 cm for the same rise in temperature. A third rod, also 30.0 cm long is made up of pieces of each of the above metals placed end-to-end and expands 0.0580 cm between 0oC and 100oC. Find the length of each portion of the composite bar. Answer: 23.0cm, 7.0cm

  11. F F Lo A • Where: • F = Tensile force, (N) • A = cross-section area, (m2) • Y = Young’s Modulus, (Pa or N/m2) • = coef. of linear expansion, (K-1) • = change in tempersture, (K) Thermal Stress so Tensile Stress (thermal stress) Tensile Strain

  12. Approximate Young’s Modulus

  13. Lo=10cm Lo=10cm Example 1: An aluminum cylinder 10 cm long, with a cross-section area of 20 cm3, is to be used as a spacer between two steel walls. At 17.2 oC it just slips in between the walls. When it warms to 22.3oC, calculate the stress in the cylinder and the total force it exerts on each wall, assuming that the walls are perfectly rigid and a constant distance apart. Answer: -8.6x106and -1.7x104N F = 0 Area A=20cm3 @ T1=17.2 oC F > 0 Stress is - 8.6x106 Pa Negative sign indicates compression @ T1=22.3 oC F = -1.7x104 N (compression)

  14. Ans Assignment:a) A wire that is 1.50 m long at 20oC is found to increase in length by 1.9 cm when warmed to 420oC. Compute its average coefficient of linear expansion for this temperature range. b) The wire is stretched just taut (zero tension) at 420oC. Find the stress in the wire if it is cooled to 20oC without being allowed to contact. Young’s modulus for the wire is 20.x1011 Pa. Answer: a) 3.2x10-5 (Co)-1; b)2.5x109 Pa 1.50 m @ 20oC 0.019 m @ 420oC 1.519 m @ 420oC 1.519 m @ 20oC F>0 F>0

  15. Assignment 1) A brass rod is 185 cm long and 1.60 cm in diameter. What force must be applied to each end of the rod to prevent it from contracting when it is cooled from 120oC to 10oC? Answer: 4.0x104 N 2) Steel train rails are laid in 12.0 m-long segments placed end-to-end. The rails are laid on a winter day when their temperature is -2.0oC. a) How much space must be left between adjacent rails if they are to just touch on a summer day when their temperature is 33.0oC? b) If the rails are originally laid in contact, what is the stress in them on a summer day when their temperature is 33.0oC? Answer: a) 5.0x10-3 m; b) 8.4x107 Pa

More Related