1 / 33

Alireza Gharagozlou Mahsa Mirhoseiny Mojgan Hejrani Diarjan Sofia, 2010

Assessment of Urban development plans to reach Sustainable Development Using GIS/RS (A case study on Tehran, District9). Alireza Gharagozlou Mahsa Mirhoseiny Mojgan Hejrani Diarjan Sofia, 2010.

brenden-tanner
Download Presentation

Alireza Gharagozlou Mahsa Mirhoseiny Mojgan Hejrani Diarjan Sofia, 2010

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Assessment of Urban development plans to reach Sustainable Development Using GIS/RS (A case study on Tehran, District9) Alireza Gharagozlou Mahsa Mirhoseiny Mojgan Hejrani Diarjan Sofia, 2010

  2. 1st FIG Symposium on Engineering Surveys for Structural Engineering, Nottingham University, July 2004 • Recognizing The Existing Potentials of Iran in Identification of Natural Resources with a Land Use Planning Approach, • Urban Development Model Using Environmental Modeling and GIS/RS • Alireza Gharagozlou, • National Cartographic Center of Iran

  3. 1st FIG Symposium on Engineering Surveys for Structural Engineering, Nottingham, University, July 2004 • Role of GIS and Remote Sensing in Land Use Planning and Environmental Impact Assessment • Conceptual Model of GIS/RS and EIA and Land Use Planning • Presenting Mathematical Model for Urban Development Plans for Tehran by using Environmental Modeling and GIS/RS

  4. Land Use Planning

  5. Environmental Impact Assessment

  6. Linear Models for Land Uses • Y1 (1984) =S(1,2,3) + H(1,2,3,4) + A(1,3,4,5) + QA(2,3,4,5) + MA(3,4) + WS(1,2,3,4,5) + SO(1,2,3,4,5,6,7,8,9) + SW(1,2,3,4) + NI(2,3,4,5) • Y2 (1994) =S(1,2,3,4,5) + H(1,2,3,4,5,6,) + A(1,2,3,4,5) + HW(1,2) + SO(1,2,3,4,5,6,7,8,9,10,11) + WS(1,2,3,4,5,6) + QA(1,2,3,4,5) + NI(1) + MA(2,3,4) + HP(1,2,3,4) • Y3 (1998) =S(1,2,3,4,5) + H(1,2,3,4,5,6) + A(1,2,3,4,5) + WS(1,2,3,4,5) + SO(1,2,3,4,5,6,7,8,9,10,11) if S(5,6) + NI(2,3,4,5) + QA(2,3,4,5) • Y4 (2001) = SW(3,4) + HP(3,4) + QA(2,3,4,5) + S(1,2,3,4) + H(1,2,3) + WS(1,2,3,4,5)

  7. Where: • S is slope, H is height or altitude • A is aspect, QA is fault line • MA is distance from ravine areas • WS is wind speed, SO is soil components • SW is distance from subterranean water resources • NI is distance from industrial sites • HW is green buffer around highways, HP is historical landmark

  8. "Slope" (S) includes six classes: 0 to 2% (class 1), 2 to 5% (class 2), 5 to 8% (class 3), 8 to 12% (class 4), 12 to 15% (class 5), and more than 15% (class 6). •  "Height" (H) includes six altitude classes: less than 1000 meters (class 1), 1000-1200 meters (class 2), 1200-1400 meters (class 3), 1400-1600 meters (class 4), 1600-1800 meters (class 5), and more than 1800 meters (class 6). •  "Aspect" (A) refers to geographical direction and includes five classes (northern, southern, eastern, western, or no direction). •  "Distance from ravine areas" (MA) includes four classes: less than 50 meters (class 1), 50-300 meters (class 2), 300-500 meters (class 3), and more than 500 meters (class 4). •  "Subterranean water resources" (SW) divides resources into four classes, based on distance to the water resource: less than 100 meters (class 1), 100-500 meters (class 2), 500-1000 meters (class 3), and more than one kilometer (class 4). •  "Distance from industrial sites" (NI) includes three classes: less than 5 kilometers (class 1), 5-10 kilometers (class 2), and 10-20 kilometers (class 3). •  "Green buffer around highways" (HW) should be considered in all environmental assessments and development plans. These buffers should be planted with evergreen trees appropriate to the region. Green buffer areas are divided into three classes: less than 10 meters (class 1), 10-100 meters (class 2), and more than 100 meters (class 3). •  "Historical landmark" (HP) divides historical places into four classes, based on how far away they are located: less than 5 kilometers (class 1), 5-10 kilometers (class 2), 10-20 kilometers (class 3), and more than 20 kilometers (class 4). •  Other categories, such as soil components (SO) and wind speed (WS), also include multiple classes.

  9. Satellite Image Analysis

  10. Land Use Planning Using Environmental Models and GIS

  11. Spatial Analysis for Urban Planning Using GIS

  12. Urban Development Plan

  13. Role of GIS and Remote Sensing in Presented research • Determining land use changes by using Arial photos and satellite images to environmental assessment and evaluation of development plans • Through the comparison of urban applications of territories, aerial photos (1955 &1992 & 2005) and satellite images, TM (1992), ETM+ (2008), analysis of city standards regarding their national dimensions by using GIS, most of the problems of the area were known

  14. Role of GIS and Remote Sensing • Boundaries of urban applications in Tehran's District 9, including schools, healthcare centers (hospitals and clinics), factories and industrial and workshop centers based on standards were determined and set by using GIS analysis and in keeping with the existing related standards

  15. Comparison Land Uses by Using Arial Photo (1955) and Satellite Image (1992)

  16. Identification of non-constructed areas in 1955 by using aerial photos and GIS

  17. Non-constructed Area in 2002

  18. The Comparison of non-constructed areas in 1955 and 2002 by using aerial photos and GIS

  19. Area of non-constructed parts in 1955 (By using spatial database in GIS)

  20. open areas in 2002

  21. The Comparison between Green Areas in 1955 and 2002

  22. Green Areas in 1955 Green Areas in 2002

  23. Findings and Results • Aerial photos taken from the District in 1955 shows that the area of open or non-constructed lands has been 156661.30 square meters whereas aerial photos and satellite images taken from the same District in 2002, shows an equivalent of 2682.10 square meters • It can be concluded then that the scales of construction works have increased by 58 times during the 47 year period of time • A comparison of green area in the two intervals of 1955 and 2002 helps prove that greeneries had occupied an area of 23906.90 square meters in 1955 whereas the figure in 2002 has decrease to 1144.30 square meters, showing a decrease 21 times the original size in the areas of green space during the study period time

  24. Analysis of Images and Photos • The analysis of the satellite images and Arial photos taken in the two time intervals well indicates that the District has quickly transformed into a compact and busy and bustling area from an originally calm area • A major issue to note however is that original, traditional roads, streets and alleyways have remained intact unlike residential areas which have taken a progressive trend • The phenomenon might lead to a widening of vehicular traffic in the area and subsequently reasons sound and air pollutions as major consequences

  25. GIS Analysis • GIS as Visualization and Processing and Databases Systems • GIS help us to comparison the location and size of urban applications with standards that present in EIA report • All analyses stated and shown have been conducted by assistance of GIS and in keeping with standards

  26. Spatial standards of urban applicationsUrban Applications standards regarding their national dimensions

  27. Analysis of healthcare centers in relation to factories

  28. Analysis of Distance of Healthcare Centers to Residential Area

  29. Analysis of Location of Hospitals and Residential Areas

  30. Analysis of Elementary Schools locations comparing with Residential Areas

  31. Results of Analysis about Urban Applications and their Locations • Analysis shows clinics should have been situated at a distance of one kilometer from industrial centers, therefore: • Shamshiri and Sayyed al-Shohada clinics have been situated within an area where Vahdat industrial complex • Pars Plastic Company and Rima Prefabricated Houses industrial complex have already been situated within their precincts • Moreover, many more factories have emerged in the vicinity of Shamshiri and Sayyed al-Shohada clinics including Bahar Lux, Miral glass factory, a tanker making factory, Goushtiran meat factory, etc.

  32. Results of Analysis about Urban Applications and their Locations • Residential areas should not be situated at a distance of more than one kilometer from the nearest healthcare centers: • Three townships which accommodate Mehrabad, Javidabad and Havapeymayi's apartment complexes are situated well away from the precincts of clinics while other scattered residential areas too are situated at a farther than standards distance from the nearest healthcare centers • Shahid Fayyazbakhsh Hospital has been constructed within industrial precincts. The existence of Zamzam soft drink factory within the precincts of the three hospitals of Babak, Meymanat and Shahriyar maternity clinic as well as the existence of many other factories within the precincts of Shariat Razavi and Shahid Fayyazbakhsh hospitals indicate an inattention to authorized boundaries of hospitals and their authorized distance to nearest factories

More Related