1 / 17

Aberdeen Grammar School

Aberdeen Grammar School. Graphic Communication. True Shapes The Cylinder. CDT Department . True Shape. This type of drawing is asked to be drawn as part of a cut, prism, pyramid, cylinder or cone. It shows the actual shape of a sloping surface.

brian
Download Presentation

Aberdeen Grammar School

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Aberdeen Grammar School Graphic Communication True Shapes The Cylinder CDT Department

  2. True Shape • This type of drawing is asked to be drawn as part of a cut, prism, pyramid, cylinder or cone. • It shows the actual shape of a sloping surface. • They can be quite confusing but are not as hard to produce as they look.

  3. True Shape • As there are other slides and presentations depicting how to draw cut prisms, pyramids, cylinders and cones we are not going to show you how to do these things in this slideshow. • Instead we will focus on producing the true shapes.

  4. True Shape - Cylinders Here we will draw the true shape of the sloping surface.

  5. True Shape Draw 2 lines at 90° to the cut from the bottom and top of the cut.

  6. True Shape Construct a clockface on the plan.

  7. True Shape Construct a clockface on the plan.

  8. 12 11 1 2 10 9 3 8 4 5 7 6 True Shape Number the clockface on the plan.

  9. This centre line must be parallel with the sloping face on the elevation. True Shape 12 11 1 2 10 9 3 8 4 5 7 6 Add a centre line at 90° to these two lines. Draw this centre line clear of all the other views to make the true shape clearer.

  10. True Shape 12 11 1 2 10 9 3 8 4 5 7 6 Now project the lines down from each of the clock points on the plan.

  11. True Shape 12 11 1 2 10 9 3 8 4 5 7 Ignore any of these lines that do not travel through the cut face of the cone. These are shown pink. 6

  12. True Shape 12 11 1 2 10 9 3 8 4 5 7 6 Project these projection lines at 90° to the cut line on the elevation.

  13. 11 True Shape Number the corners to stop you getting confused. 12 7 11 1 2 10 9 3 Use a compass to transfer the distances from the centre line to the clock face. 8 4 5 7 6 Distances from the centre line to point 11 and point 7 are the same so can be marked on at the same time.

  14. 11 12 True Shape 1 12 7 11 1 2 2 10 6 3 5 9 3 4 8 4 5 7 6 Repeat for all the points.

  15. 11 12 True Shape 1 12 7 11 1 2 2 10 6 3 5 9 3 4 8 4 Draw a smooth freehand curve joining these points. 5 7 6 Now join points 7 and 11 with a straight line.

  16. True Shape 12 11 1 2 10 9 3 8 4 5 7 Here the true shape is shown more clearly. 6

More Related