1 / 39

Lecture 9 – What Controls the Composition of Seawater

Lecture 9 – What Controls the Composition of Seawater. Seawater is salty! Why? How is the composition of river water different from seawater? What controls the composition of riverwater? What happens when you evaporate riverwater? What controls the composition of seawater?

brook
Download Presentation

Lecture 9 – What Controls the Composition of Seawater

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Lecture 9 – What Controls the Composition of Seawater Seawater is salty! Why? How is the composition of river water different from seawater? What controls the composition of riverwater? What happens when you evaporate riverwater? What controls the composition of seawater? Could Chemical Equilibrium reactions control thecomposition of the Ocean? What is meant by the Kinetic Model of Seawater? How does the Mass Balance Control work? Sources - Rivers, Mid-Ocean Ridges (MOR) Sinks – Sediments, MOR

  2. Observed Mean Ocean Concentrations – large range Logarithmetic: log10c = x c = 10x

  3. Could seawater originate by evaporation of river water?

  4. River Water ≠ Sea Water Mainly Na+/Cl- Mainly Ca2+/HCO3- ppm = mg kg-1 Both the composition and key ratios are different

  5. What Controls the Composition of Rivers?

  6. Weathering of rocks Weathering of limestone is considered a congruent reaction (all solid dissolves) CaCO3(s) + CO2(g) + H2O = Ca2+ + 2 HCO3- 12 Weathering of alumino-silicate minerals to clay minerals are examples of incongruent reactions (solid partially dissolves) silicate minerals + CO2(g) + H2O == clay minerals + HCO3- + 2 H4SiO4 + cation 112 A specific reaction written in terms of CO2(g) KAlSi3O8(s) + CO2(g) + 1 1/2H2O = 1/2 Al2Si2O5(OH)4(s) + K+ + HCO3- + 2H4SiO4 * With these reactions you could calculate how much CO2(g) is consumed by weathering (orthoclase feldspar) (kaolinite)

  7. Variability in Erosion Among Continents Europe, North America and Asia are more calcareous continents. Most of variability due to Ca2+ and HCO3- which come from weathering of carbonate rock SO42- and Cl- come from aerosols and weathering of evaporite rocks (e.g. Salt or NaCl). Na+, K+, Mg2+, SiO2 come from weathering silicate rocks

  8. Evaporation of River water Makes a Na, HCO3, CO3 brine. pH is very basic. pH = -log (H+) Examples: Mono Lake, CA Soap Lake, WA

  9. Mono Lake, California Tufa Towers

  10. Equilibrium approaches – Some History Goldschmidt (1933) igneous rock (0.6kg) + volatiles (1kg) === seawater (1 L) + sediments (0.6kg) + air (3 L) Sillen (1959, 1961) Sources - Weathering reactions Sinks - Reverse weathering reactions Organizational framework: Gibbs Phase Rule f = c + 2 – p f = degrees of freedom (variables like T,P, concentrations, e.g. Na+, Cl-, Ca2+, SO42-) c = components (ingredients, e.g., HCl, NaOH, MgO)) p = phases at equilibrium (domains of uniform composition, e.g. gas, liquid, pure solids)

  11. Sillen: Nine component model (C = 9) Acids: HCl, H2O, CO2 Bases: KOH, CaO, SiO2, NaOH, MgO, Al(OH)3 The ocean chemistry results froma giant acid-base titration. Acids from the volcanoes and bases from the rocks. Sillen suggested that the following phases were at equilibrium. Kaolinite, illite, chlorite, montmorillonite and phillipsite are types of clay minerals If these phases at equilibrium at constant T and Cl, then the SW composition is fixed and it could only change if temperature or Cl- changed. Equilibrium constants not known.

  12. Mass Balance approaches Mackenzie and Garrels 1966 proposed that the input from rivers was balanced by removal to sediments but they had to invoke a reverse weathering hypothesis for which there was (and still is) little evidence. The river inputs are given below (total amount for 108 y). For a steady state ocean, these have to be removed. Mackenzie and Garrels (1966) American Journal of Science, 264, 507-525

  13. Mackenzie and Garrels (1966) A Chemical Mass Balance for Seawater Still need to remove: 15% of Na 90% of Mg 100% of K 90% of SiO2 42% of HCO3

  14. Specific reverse weathering type reactions proposed to remove excess ions. Newly formed clays would equal 7% of sedimentary mass.

  15. Most clays are detrital-reflecting continental sources chlorite in deep-sea sediments detrital = particles of rock derived from pre-existing rock by weathering and erosion

  16. illite in deep-sea sediments

  17. So, an equilibrium approach doesn’t work. The composition of seawater has changed in the past and The phases suggested do not appear to be at equilibrium But there is some evidence that such reactions do occur – especially in near shore sediments So reverse weathering not totally eliminated! But maybe not for an equilibrium ocean.

  18. Kinetic Model of Seawater - AMass Balance Approach What is the origin of seawater’s composition? Sources Rivers?? Mid-Ocean Ridges?? Other?? Aerosols Sinks Sediments?? Mid-Ocean Ridges?? Other?? Aerosols

  19. Residence Time   = mass / input or removal flux = M / Q = M / S Q = input rate (e.g. moles y-1) S = output rate (e.g. moles y-1) [M] = total dissolved mass in the box (moles)

  20. Mass Balance Model – Modern Version. Includes ridge crest processes.

  21. How about mid-ocean ridges?? 350ºC vents have no Mg2+, SO42- or alkalinity (HCO3-). What’s left is Cl-, Na+, Ca2+, K+, Fe2+

  22. Sites of Hydrothermal Vents on Mid-Ocean Ridges

  23. Hydrothermal End-Member (350°C)(from Von Damm et al (1985) from site at 21° N (Hanging Garden)

  24. Kinetic model of seawater – mass balance model Main input and removal fluxes for major ions in seawater (from McDuff and Morel, 1980) Note: Vr = 4.55 x 1016 L y-1 Vr/Vhydro = 300 Volume of ocean = 1.37 x 1021 L

  25. Group Ia – Cl short term cycle = aerosols and rivers main sink over geological time = evaporites = controlled by tectonics, geometry of marginal seas residence time is so long (~100 My) that changes are hard to see. Group Ib – Mg, SO4, probably K input from rivers ; main sink through ocean crust Thus control is mass balance: VrCr = Vhydro (Csw – Cexit fluid) for Mg2+ , Cexit fluid = 0 thus: Csw = ( Vr / Vhydro ) Cr = 300 Cr The dominant control is Vhydro, thus tectonics.

  26. Group II (e.g. Ca, Na) (e.g. the remaining cations with long residence times) Consider the charge balance for seawater: 2[Ca2+] + [Na+] + 2[Mg2+] + [K+] = [HCO3-] + [Cl-] + 2[SO4 2-] or rearranged: 2[Ca2+] + [Na+] - [HCO3-] = [Cl-] + 2[SO42-] - 2[Mg2+] - [K+] This side is controlled by tectonics Therefore this sum is also controlled by tectonics The controls on the relative proportions of elements on the left hand side are complicated but include: a) Ca/Na ion exchange in estuaries b) Ca/HCO3 regulation by calcium carbonate equilibria

  27. But – the problem with this approach is that not all HT flow is 350°C! • Three Categories of Hydrothermal Flow • 350°C Black Smokers - 0.5 x 1013 kg y-1 • 10°C Axial - 440 x 1013 kg y-1 • 10°C Off Axis - 630 x 1013 kg y-1 • River Flux (Global) - 3500 x 1013 kg y-1 from Emerson and Hedges (p. 55)

  28. Group III (e.g. nutrients (Si, P, C, N) and trace metals Internal cycling can be described by the simple 2-box ocean model The main balance is input from rivers and removal as biological debris to sediments Input from rivers = removal to sediments VrCr = f B where f is the fraction of biogenic flux that is buried (escapes remineralization)

  29. Summary Salinity of seawater is determined by the major elements. Early ideas were that the major composition was controlled by equilibrium chemistry. Modern view is of a kinetic ocean controlled by sources and sinks. River water is main source – composition from weathering reactions. Evaporation of river water does not make seawater. Reverse weathering was proposed – but the evidence is weak. Sediments are a major sink. Hydrothermal reactions are a major sink. Still difficult to quantify!

  30. Pore Water Gradients in Marine Sediments But if fluxes are real there would be more solid phase Mg than observed! South Atlantic-Sayles (1979)

  31. The long-term global carbon balance CaCO3(s) + CO2(g) + H2O = 2HCO3- + Ca2+ 2HCO3- + Ca2+ = CaCO3(s) + CO2(g) + H2O

  32. H4SiO4 vs Mg in a “Black Smoker” at 21°N Used to obtain end-member concentrations for 350°C vents

  33. Weathering Susceptibilities Minerals Weather at Different Rates

  34. Chemical Weathering and the Geological Carbon Cycle 1. CO2 is removed by weathering of silicate and carbonate rocks on land. 2. The weathering products are transported to the ocean by rivers where they are removed to the sediments. 3. When these sediments are subducted and metamorphosed at high T and P, 4. CO2 is returned to the atmosphere. Ittekkot (2003) Science 301, 56 For more detail see Berner (2004) The Phanerozoic Carbon Cycle: CO2 and O2. Oxford Press, 150pp.

  35. East Pacific Rise , from Von Damm et al., (1985) Mg Alk

  36. East Pacific Rise, continued SO4 350C vents have no Mg, SO4 or HCO3. What’s left is Cl, Na, Ca, K, Fe

  37. Hydrothermal Vent Compositions – German and Von Damm (2004) Treatise on Geochemistry, Vol. 6, The Oceans and Marine Geochemistry, Elsevier

More Related