1 / 7

iServ Technical Firmware Manual

iServ Technical Firmware Manual. Handset: 8630 Base: 8660 Repeater: 4024. Requirements. Handset: USB Dongle. Firmware. (Mia Tech) Root Directory Files: FL7. Set Provider. FwuPath . Raffle. Base Station: DHCP (Any Switch providing DHCP will work). Handset – To get the Base IP.

callum
Download Presentation

iServ Technical Firmware Manual

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. iServTechnical Firmware Manual Handset: 8630 Base: 8660 Repeater: 4024

  2. Requirements Handset: • USB Dongle. • Firmware. (Mia Tech) • Root Directory Files: • FL7. • Set Provider. • FwuPath. • Raffle. Base Station: • DHCP (Any Switch providing DHCP will work). • Handset – To get the Base IP. • Google Chrome – Not Internet Explorer, as it Cache’ the sites. • Pumpkin (Any TFTP Program). • Firmware (Mia Tech) • Root directory Files: • FwuPath • Beatus Repeater: • USB Dongle – Repeater Dongle. • USB Drivers (Same as for the Handset). • Firmware • Root Directory Files: • Repeater Upgrade • FwuPath • DECT4024

  3. Firmware Locations • Samsung Dealer: • http://www.miatech.co.za/Partner/Technical/Software/I-Serv%20IP%20DECT/ • Username: “Dealer Username” • Password: “Dealer Password” • NON Samsung Dealer: • http://www.miatech.co.za/Partner/iserv/ • Username: iserv • Password: iserv

  4. Handset Procedure • Place the “FL7” file in root directory. • Install the USB Driver. • Insert the Dongle. • Check Comport in Device Manger. • Go to the root file: • Open FL7.cfg with Notepad. • Edit the Comport. • Save & Exit. • Insert the Dongle into the earphone jack of the handset. Handset must be off. • Open CMD Prompt and type the following: • Cd\ • Cd FL7 • Do Not press Enter until the button config has been done. • Fl.bat pega (Press the TAB button, this will auto complete the file name). • C:\FL7>fl.bat PegasusMKII_Raffle_Pp_and_boot_v0179_b0004.hex • Once the above line is in the CMD, do the following sequence: • HOLD DOWN the Dongle button. • HOLD in the RED button on handset. • LEAVE the Dongle button. • Press ENTER on the CMD prompt. • ONLY Leave the Red button once the numbers has started counting. • Once it has completed, remove and replace battery. • FIRMWARE IS COMPLETE.

  5. Base Procedure • Place the “FwuPath” file in root directory. • Install Pumpkin. • Go to Options: • Download Path: C:\ • Give all files. • Take all files. Open Management Tab on Base station: Menu*47* • Management transfer Protocol: TFTP • SysLog Level: Debug • Open Firmware Update Tab: • Firmware Update Server Address: PC IP Address • Firmware Path: \FwuPath • Click Save. • Update Base Stations: • Update this Base Station Only • Stand Alone • Update All Base Stations • Multi Cell Setup • Insert the required version and click save. • Pumpkin will start sending the files. • Base will flash Rapid red then have solid green. FIRMWARE COMPLETE.

  6. Repeater Procedure • Place the “Repeater Upgrade” file in root directory. • Install the dongle drivers. • Check Comport in Device Manager. • Go to Root file: Open FL7.cfg with Notepad. • Edit the Comport. • Save & Exit. • Open CMD prompt and type the following: • Fl.bat rota (Press the TAB button, this will auto complete the file name). • C:\Repeater Upgrade>fl.bat Rota.spi_v0026.hex • Insert the Dongle into the Dongle kit and Repeater. • Press and HOLD the Dongle Button. • Insert the Power cable into the Dongle Kit. • Release the Dongle button. • Press enter on the CMD Prompt. • Wait for Success. • FIRMWARE COMPLETE.

  7. Repeater Upgrade Kit

More Related