1 / 22

PESTICIDE APPLICATION IN THE GREENHOUSE

PESTICIDE APPLICATION IN THE GREENHOUSE. Punya Nachappa GREENHOUSE MANAGEMENT HORT 6050. INTRODUCTION. A greenhouse is a unique environment for the development of pests. Greenhouses are warm, humid environments, ideally suited for pest development.

carlow
Download Presentation

PESTICIDE APPLICATION IN THE GREENHOUSE

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. PESTICIDE APPLICATION IN THE GREENHOUSE Punya Nachappa GREENHOUSE MANAGEMENT HORT 6050

  2. INTRODUCTION • A greenhouse is a unique environment for the development of pests. • Greenhouses are warm, humid environments, ideally suited for pest development. • Pest population explosion due to absence of natural enemy complex.

  3. ARTHROPOD PESTS OF GREENHOUSE • Whiteflies • Aphids • Fungus gnats • Leaf miners • Mealybugs • Caterpillars • Scale insects • Thrips • Mites • Slugs and snails

  4. PESTICIDES • Pesticides are substances that can kill, repel,or suppress the growth of living organisms. • Different types of application methods

  5. CLASSIFICATION I. Based on their use, relative to crop. • Pre-plant: Applications before crop planting. • Pre-emergence: Application of a pesticide where a crop is present but not emerged from soil. • Post-emergence: Application after a crop is emerged. • Seed Dressing: Coating of pesticide onto the seed.

  6. II. Based on application method • Band sprayed: Straddling the row. • Directed: Towards target but avoiding the crop. • Spot application: To individuals, small patches or clumps of plants. • Chemigation: Injected into irrigation water.

  7. SELECTION OF APPLICATION EQUIPMENT • Pest status • Pesticide formulations • Capacity of equipments • Operator safety features • Ease of operation, Calibration maintenance • Type and stage of crops grown

  8. EFFECT OF APPLICATION FACTORS ONBIOLOGICAL RESPONSES • Spray distribution • Drop numbers and size • Drop velocity • Spray and concentration

  9. AGROCHEMICAL TRADE LABELS • Signal words - DANGER, WARNING, CAUTION ,POISON • Precautionary measures useful in preventing physical harm to the individual • Instructions in case of exposure, emergency treatment • Instructions in case of fire or chemical spill • Instructions for chemical handling and storage

  10. METHODS OF PESTICIDE APPLICATION

  11. High-Volume (HV) Spray • Most common method of pesticide application • Least expensive • Size of spray droplets : >100microns • Coverage includes outer leaves and upper surfaces • Soluble powders, WP, EC. • Eg. Gasoline motor powered pesticide sprayers Cornell nozzles

  12. DUST APPLICATION • Uncommon method. • Active ingredient and filler (talc,clay, diatomaceous earth). • Application by hand-cranked units to large motorized dusters. • Use respirators or gas masks while applying.

  13. LOW-VOLUME (LV) SPRAYERS • Uniform coverage, less pesticide, reduction in time. • Smaller droplet size: <100microns. • Coverage include inner leaves. • Computer programmed.

  14. ELECTROSTATIC SPRAYERS • Invented by Dr. Ed Law at the University of Georgia.  • Max-Charge induction electrostatic nozzle.  • Electrostatic sprayers produce electrically charged spray droplets which are carried into the plant canopy in a high speed air stream. • The result is more than twice the deposition efficiency

  15. ELECTROSTATIC SPRAYERS • Improved canopy penetration • Increased under-leaf coverage • Reduced spray drift • Better coverage • Fewer fill-ups • Easy calibration • Low maintenance • Dilute capability

  16. AEROSOL APPLICATION • Insecticides in cylinders under pressure. • Propellants- isobutane, isopropane, fluorocarbon, compressed carbon dioxide. • Droplet size: <15-20 microns. • Temperature: 70-80 F • Calm day and dry foliage.

  17. FOG APPLICATION • LV method similar to aerosol application. • Insecticide(10%) + oil based carrier. • WP and EC. • Droplet size: 10-60microns. • PPE

  18. SMOKE APPLICATION • Another form of LV method. • Simplest form of application. • No specialized equipments. • Dosage rate is important. • Environmental considerations.

  19. VOLATILIZATION • Gaining acceptance. • Frying pans above plant height. • Labor simplicity. • Low residues.

  20. ROOT SUBSTARTE APPLICATION • Soil-borne insects. • Granular formulations. • Small spoons to Feeder measure meter. • Plants should be dry while application, then water.

  21. CALIBRATION Is the process of measuring and adjusting the amount of pesticide your equipment applies to the target area. Three factors • Correct pump operating pressure • Type of diluent or carrier • Spray volume required

  22. PESTICIDE SAFETY • Personal Protective Equipment (PPE) • Equipment safety • Storage area • Disposal of pesticide containers • Spill cleanup and reporting • READ THE LABEL

More Related