1 / 72

RADIATION SAFETY PROCEDURES IN INDUSTRIAL RADIOGRAPHY

RADIATION SAFETY PROCEDURES IN INDUSTRIAL RADIOGRAPHY. Contents. Introduction Basic principle and applications of radiographic techniques Industrial radiographic equipment Control of external radiation exposures Safe working procedures Summary. Introduction.

carmelita-aguilar
Download Presentation

RADIATION SAFETY PROCEDURES IN INDUSTRIAL RADIOGRAPHY

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. RADIATION SAFETY PROCEDURES IN INDUSTRIAL RADIOGRAPHY

  2. Contents • Introduction • Basic principle and applications of radiographic techniques • Industrial radiographic equipment • Control of external radiation exposures • Safe working procedures • Summary

  3. Introduction • Radiography technique - ensuring the integrity of vessels, pipes, welded joints and metal castings. • Radiography produces high energy/penetrative radiations - person accidentally exposed to these radiations would result in radiation injury. • To avoid unnecessary radiation exposure certain procedures should be introduced, through: • proper radiation safety programme • Training • maintenance of sources and devices.

  4. Radiation Source Specimen Film Basic Principle and Applications of Radiographic Techniques • Three basic items needed: radiation source, object, and film. • Basic principle: x-rays or gamma rays interact with a test object, some of the radiation is absorbed and another portion passes through un-deviated to form an image. • Applications: to detect defects in welding, casting and building structure.

  5. Industrial Radiographic Equipment • X-Ray radiographic equipment. • X-ray tube; • Transformers or high voltage source to produce the required voltage; and • A set of control panel. • Gamma radiography sources and containers.

  6. Industrial Radiographic Equipment X-ray radiographic equipment: X-ray tubes • The x-ray tube is a vacuum tube in which electrons are accelerated to a high velocity by means of electrostatic field and then suddenly stopped by collision with a target. • Result of this collision, x-rays are emitted. • To prevent x-rays from becoming a hazard and create scattered radiation, the x-ray tube is shielded with lead (the window remains unshielded).

  7. Filament (Cathode) Target (Anode) Glass tube envelope X-ray tube window Industrial Radiographic Equipment X-ray radiographic equipment: X-ray tubes (cont.): The basic components of a x-ray tube are: • a sealed glass tube envelope, • a cathode, and • an anode

  8. Industrial Radiographic Equipment X-ray radiographic equipment: X-ray tubes (cont.): A sealed glass tube envelope: • Made of glass or metal-ceramic having high melting point to withstand the intense heat generated at the anode. • High vacuum environment: • To prevent oxidation of the electrode materials; • To permit ready passage of the electron beam without ionisation of gas within the tube; and • To provide electrical insulation between the electrodes.

  9. Industrial Radiographic Equipment X-ray radiographic equipment: X-ray tubes (cont.): A cathode: • Cathode incorporates focusing cup and filament. • Focusing cup acts as a lens to direct the electrons in a beam towards the anode. • Filament is heated by AC current from a separately controlled transformer. • A change in the voltage (kV) applied to the filament varies the filament current (in A) and the number of electrons emitted. • Current passing between the cathode and anode by means of the high-speed electrons, called tube current (in mA).

  10. Industrial Radiographic Equipment X-ray radiographic equipment: X-ray tubes (cont.): An anode: • Anode - metallic electrode of high electrical and thermal conductivity. • Target materials - tungsten, gold or platinum. • Tungsten - most common anode material because it has a high atomic number, high melting point and high thermal conductivity. • Generation of heat if not controlled would quickly cause the surface of the target to erode. • To avoid overheating the target, the tungsten is embedded in a mass of material with high thermal conductivity, such as copper.

  11. Industrial Radiographic Equipment X-ray radiographic equipment: the X-ray control panel (cont.): • The three controls that govern a radiographic exposure using x-rays equipment are the timer, the current (mA) knob and the voltage (kV) knob.

  12. Industrial Radiographic Equipment X-ray radiographic equipment: the X-ray control panel (cont.): Timer: • The timer is usually calibrated in minutes. • The exposure time for an exposure is preset; when the equipment is activated, the timer counts down from the preset value.

  13. Industrial Radiographic Equipment X-ray radiographic equipment: the X-ray control panel (cont.): Current knob: • The current knob - controls the intensity or quantity of x-rays. • When current flow through the filament is increased - the filament get hotter resulting in an increase in the intensity of electrons released. • The greater the intensity of electrons striking the target, the greater the intensity of the x-rays produced.

  14. Industrial Radiographic Equipment X-ray radiographic equipment: the X-ray control panel (cont.): Voltage knob: • The voltage knob governs the energy or quality (penetrating power) and quantity (intensity) of x-rays produced. • The voltage meters on the control panels for conventional x-ray equipment are peak voltage values measured across the tube

  15. High positive charge Focusing cup Electrons Cathode Anode Electron bombardment at target material Hot body Electrons cloud Electrons cloud around a heated filament Industrial Radiographic Equipment X-ray radiographic equipment: generation of x-rays(cont.):

  16. Industrial Radiographic Equipment X-ray radiographic equipment: generation of x-rays(cont.): • Apply kV, the electrons are quickly accelerated towards the anode. • Electrons will strike a target material and is brought rapidly to halt. • More than 97% electrons’ kinetic energy converted to heat; and less than 3% to x-ray photons.

  17. High speed electron Continuous x ray Industrial Radiographic Equipment • X-ray radiographic equipment: generation of X-rays (cont.): • Continuous X-ray

  18. High speed electron Ejected electron Characteristic x- ray Industrial Radiographic Equipment • X-ray radiographic equipment: generation of X-rays (cont.): • Characteristic X-ray Low speed electron

  19. Intensity of radiation (with the same ) increases with increasing kV  added by increasing kV High kV Low kV INTENSITY WAVELENGTH Min.B Min.A Industrial Radiographic Equipment • X-ray radiographic equipment: generation of X-rays (cont.): • Effect of kV: • Intensity or quantity of x-ray increased with increasing kV. • Energy of x-ray increased with increasing kV.

  20. INTENSITY High mA Low mA Wavelength () min Industrial Radiographic Equipment X-ray radiographic equipment: generation of X-rays (cont.): Effect of mA: • Intensity or quantity of x-ray increased with increasing mA. • Energy of x-ray remains constant with increasing mA.

  21. Industrial Radiographic Equipment X-ray radiographic equipment: types of X-ray equipment: • Directional X-ray units • Panoramic X-ray units • Linear accelerators • Microfocus X-ray system • Flash X-ray equipment • Betatron

  22. X-ray radiographic equipment: types of X-ray equipment (cont.): Directional and panoramic conventional X-ray units. Directional x-ray tube assemblies are fitted with suitable window/collimators Without the collimator the tube is called panoramic x-ray tube. Industrial Radiographic Equipment

  23. Industrial Radiographic Equipment Gamma radiography sources and containers: • ISO Standard 2919, ISO Standard 3999 – designed and tested standards for gamma ray sources containers used in industrial radiography. • Activity of the source after time t can be calculated by using these formulas: a). At = Ao.e-0.693t/T1/2 Where At = activity after time t; Ao = original activity; T1/2 = half life or b). 2n = Ao/An Where Ao = original activity; An = activity after n half life; n = the numbers of half-life

  24. Industrial Radiographic Equipment Gamma radiography sources and containers (cont.): • Radionuclides (sealed source) commonly used in industrial radiography:

  25. Industrial Radiographic Equipment Gamma radiography sources and containers (cont.): Exposure container: • Gamma containers classification according to mobility: • Class P (portable, less 50kg, carried by hand) • Class M (Mobile, example by trolley) • Class F (Fixed, installed in an enclosure) • ISO 3999 specifies dose rate limits for Class P, M and F containers.

  26. Maximum dose equivalent rate Sv/h Class On external surface of container At 50mm from external surface of container At 1m from external surface of container P 2000 500 20 M 2000 1000 50 F 2000 1000 100 Industrial Radiographic Equipment Gamma radiography sources and containers (cont.): Exposure container: • Dose rate limits for the various classes of exposure containers (According to ISO 3999)

  27. Class M – mobile Typical Co-60 Class P – Portable Typical Ir-192 Industrial Radiographic Equipment Gamma radiography sources and containers (cont.): Exposure container:

  28. Industrial Radiographic Equipment Gamma radiography sources and containers (cont.): Types of gamma ray projectors or cameras: • Removable Plug Type Unit - Available with capacities up to 74GBq of Co-60 (or 3.7TBq of Ir-192). • D-type Unit - Available with capacities up to 277.5GBq of Ir-192 or 37GBq of Cs-137. • Remote Control Unit - Operated from a remote distance. Units that can hold very large Ir-192 sources and up to 18.5TBq Co-60 are also available.

  29. source assembly source pigtail connector Industrial Radiographic Equipment • Gamma radiography sources and containers (cont.): • Source assemblies

  30. Crank Type Pistol Type Industrial Radiographic Equipment • Gamma radiography sources and containers (cont.): • Remote controls

  31. Industrial Radiographic Equipment • Gamma radiography sources and containers (cont.): • Guide and extension tubes

  32. Industrial Radiographic Equipment • Gamma radiography sources and containers (cont.): • Collimators - made from: • Tungsten • Depleted uranium • Lead

  33. Industrial Radiographic Equipment Pipe crawler equipment: • Application - used to radiograph welds of pipelines. • The machines/mobile carriage carry either an x-ray tube assembly or a gamma source. • The crawler is powered by batteries on the carriage, an internal combustion engine, or trailing cables from a generator. • The crawler is activated and controlled by the radiographer from outside the pipe using a control source, Cs-137 sealed source.

  34. Industrial Radiographic Equipment Safety features of radiographic equipment and shielded enclosure: • The equipment used (example: projector, source assembly, sealed source, and all ancillary equipment) should meet the current specifications stipulated in ISO 3999, ISO 2919 or other equivalent national standards. • Gamma projectors should not be used in conditions other than what they were designed for. • X-ray equipment, electrical safety needs to conform to national and international electrical safety standards.

  35. Industrial Radiographic Equipment Safety features of radiographic equipment and shielded enclosure: For shielded enclosures, the safety system provided should have the following items: • Interlocking devices should prevent exposure from taking place unless the door is properly closed, or immediately terminate the exposure when the door is opened. • Cut-off switches or other means inside the enclosure, which allows for control of an exposure by any person inadvertently trapped inside.

  36. Industrial Radiographic Equipment Radiation safety equipment: • Personal monitoring instruments: • They dose monitoring instruments, are small devices, designed to be worn by an individual radiographer to measure the exposure received by them, • Examples of these instruments are: • pocket dosimeter, • film badge, and • thermoluminescent dosimeter (TLD)

  37. Industrial Radiographic Equipment Radiation safety equipment (cont.): • Monitoring instruments / dose rate meters: • Dose rate monitoring/measuring instruments or survey meter are those that measure the time rate, at which exposure is received. • A meter should be available for use with each source of ionizing radiation. • All meters should have a battery test position and the battery state should always be checked prior to operation. • Dose rate meters are expensive and delicate instruments, and should be treated with care and respect at all time. • Only calibrated instrument shall be used.

  38. Industrial Radiographic Equipment Radiation safety equipment (cont.): • Monitoring instruments / dose rate meters: • The survey meter should be used to achieve the following objectives; • To check initial level at the safety barriers. • To monitor on a routine basis the dose rate at the safety barriers, particularly when the radiographic location varies. • To check that a source is fully shielded after use or that a source is fully retracted. • To help locate a lost source.

  39. Industrial Radiographic Equipment Radiation safety equipment (cont.): • Source changer: • A source changer - a device used to transport new or old sources from the manufacturer to the operating organisation and vise-versa. • Source changing: • Performed in a controlled area by trained and authorised workers. • It will be done according to instruction manual given by the manufacturer.

  40. Industrial Radiographic Equipment Radiation safety equipment (cont.): • Source changer:

  41. Control of External Radiation Exposure The three principle methods used to control radiation exposure are: • Time • Distance • Shielding

  42. Control of External Radiation Exposure Time: • The exposure received by an individual working in an area is directly proportional to the amount of time that the individual spends in the area. • The individual’s exposure will be equal to the product of the radiation intensity and the amount of time spent in that radiation intensity. • This can be mathematically expressed as: Exposure (E) = Intensity (Dose Rate, I) x Time (t)

  43. Control of External Radiation Exposure Distance: • Dose rate is inversely proportional to the square of the distance from the source. • This is known as the inverse square law. Mathematically it can be expressed as: (I1/I2) = (d2/d1)2 • The above formula can also be used if the specific gamma ray constant given. The gamma ray constant represents the radiation dose rate from one GBq source at a unit distance, usually one meter.

  44. Control of External Radiation Exposure Gamma ray constant for radioisotopes used in industrial radiography

  45. Control of External Radiation Exposure Shielding: • The effectiveness of shielding materials depends on the atomic number, the density of the material and the thickness of the material. • The shielding efficiency is also dependent on the energy of the gamma rays / x-rays. • Higher energies are less likely to interact with electrons. Thus, they are more penetrating.

  46. x,  Io Ix Control of External Radiation Exposure Shielding (cont.): • Formulas for shielding calculation: • Ix = Io exp (-x) Where Ix = dose rate after passing thickness x; Io = dose rate before shielding;  = linear attenuation coefficient; x = thickness • Intensity (Ix) = Intensity (Io) x Transmission factor () • Half-value layer (HVL), 2n = (Io/ Ix) Where n = the number of HVL • Tenth-value layer (TVL), 10n = (Io/ Ix) Where n = the number of TVL

  47. Control of External Radiation Exposure Shielding (cont.): • HVL and TVL values for radiographic radioisotopes and common shielding materials

  48. Control of External Radiation Exposure Shielding design for an exposure room: • It is an enclosed space engineered to provide adequate shielding from ionizing radiation. • It is important to plan the design of the exposure room for immediate and foreseeable future needs before commencing the construction. • The shielding design should also consider both the primary and scattered radiations. The amount of shielding should be calculated with reference to the dose rate, use factor and occupancy factor. • Once the design of the exposure room has been established, no subsequent changes that affect radiation safety are made unless approved by the Regulatory Authority.

  49. Safe Working Procedures Preparation prior to commencement of work: • Personnel monitoring: • All personnel must wear appropriate personnel monitoring at all times during radiography. • The film badges should be stored in a radiation free area when not in use. • Any accidental exposure or damage to the film badge due to mishandling shall be reported immediately to the safety officer in-charge.

  50. Safe Working Procedures Preparation prior to commencement of work (cont.): • Radiation survey meter: • The response of the instrument should be appropriate to the type of radiation. • Only calibrated instruments shall be used. (Refer to the instrument's certificate of calibration). • Ensure that the instrument's battery is in good working condition.

More Related