1 / 16

Optimisation of Softer Handover in UMTS Network

Optimisation of Softer Handover in UMTS Network. Antti Hassinen TeliaSonera Finland, Sonera Mobile Networks Oy. Supervisor: Professor Sven-Gustav Häggman Instructor: Kari Ahtola, M.Sc. Agenda. Introduction Overview of UMTS network and handover types Soft & softer handover

caseygarcia
Download Presentation

Optimisation of Softer Handover in UMTS Network

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Optimisation of Softer Handover in UMTS Network Antti Hassinen TeliaSonera Finland, Sonera Mobile Networks Oy Supervisor: Professor Sven-Gustav Häggman Instructor: Kari Ahtola, M.Sc.

  2. Agenda • Introduction • Overview of UMTS network and handover types • Soft & softer handover • Optimisation work & results • Summary & future work

  3. Introduction • Thesis was made for Sonera Mobile Networks Oy in the Mobile System Planning department • Objective was to gather softer handover knowledge, get information how softer handover parameters work and optimise softer handover • Means: Literature, 3GPP specifications, IEEE publications and optimisation measurements

  4. Node B RNC USIM Node B ME Node B RNC Node B UMTS network architecture Iu Uu CS domain UE = User Equipment ME = Mobile Equipment USIM = UMTS SIM Iub Iu CS MSC / VLR Circuit switched GMSC HLR Cs Iur Iu PS SGSN GGSN Packet switched PS domain External Networks UE CN UTRAN UTRAN = UMTS Terrestial Radio Access Network RNC = Radio Network Controller

  5. Handover types • Soft Handovers (SHO): • Soft and softer handover • Hard Handovers: • Inter-frequency handover • Inter-system handover

  6. Soft and Softer Handover (1/2) Soft handover Softer handover RNC RNC Node B 2 Node B 1 Sector 1 Sector 2

  7. Soft and Softer Handover (2/2) • Soft Handover • Uplink: Selection Combining in RNC • Downlink: Maximum Ratio Combining in UE • Softer Handover • Maximum Ratio Combining both in Node B and UE • Advantages of SHO • Continuos handovers • SHO gain (reception of same signal by to Node Bs) • Avoid near-far problem • Disadvantages • SHO overhead (More resources needed than in a single link connection)

  8. Handover procedure • Measurements (e.g. CPICH Ec/N0, RSCP or downlink pathloss ) • Filtering • Reporting (Periodic or Event triggered) • Events add, drop, replace, change best, above threshold, below threshold • Soft handover algorithm • Execution CPICH = Common Pilot Channel RSCP = Received Signal Code Power

  9. Soft Handover Algorithm Maximum active set size = 2

  10. Factors effecting Softer Handover • Parameters • Addition, Drop & Replacement windows • Addition, Drop & Replacement timers • Maximum Active Set Size • CPICH Ec/N0 Filter Coefficient • Active Set Weighting Coefficient • Other factors • Network topology (macro or micro sites) • Placement of antennas • Radio environment

  11. Optimisation of Softer Handover • Goal for optimisation: Minimise SHO overhead and UE transmission power without lowering quality • Measurement method: • Field measurements by drive tests • Logging from the UE • Key Performance Indocators: • SHO overhead • number of SHO events (i.e. signalling load) • UE transmission power (SHO gain) • Quolity indicators: BLER, Dropped calls & Failed call attempts

  12. Measurement Results (1/3) • Measurement results for CPICH Ec/N0 filter coefficient • Measurement results for active set weighting coefficient

  13. Measurement Results (2/3) • Measurement results for addition window • Measurement results for drop window

  14. Measurement Results (3/3) • Performance comparison between initial and optimised values

  15. Summary and future work • Parameters CPICH Ec/N0 filter coefficient, active set weighting coefficient, addition window and drop window have the biggest effect, timers little effect • Optimisation minimised SHO overhead • No clear gain • Future work: • Testing with other services, radio enviroment (macro, micro), user speeds • Apply optimisation also to soft handover and soft - softer handover

  16. The End • Thank you! • Questions

More Related