1 / 38

Product Liability Safety Factors CE marking Recreational Craft Directive

Product Liability Safety Factors CE marking Recreational Craft Directive. MATS232. Outline. Product Liability Safety factors CE marking Recreational Craft Directive (RCD) Classification societies. Product Liability. Product Liability.

cdusek
Download Presentation

Product Liability Safety Factors CE marking Recreational Craft Directive

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Product Liability Safety FactorsCE markingRecreational Craft Directive MATS232 MATS232 PLA-RCD.ppt

  2. Outline Product Liability Safety factors CE marking Recreational Craft Directive (RCD) Classification societies

  3. Product Liability

  4. Product Liability • every manufacturer has a responsibility for damage and injuries that a product causes to people and property • this responsibility may be transferred to the importer • the liability may lead to payments for damages or other legal consequences MATS231 Week 07 PLA-RCD.ppt

  5. Product Liability • the product should be systematically and carefully scrutinised to determine what damage it may cause • documentation of product development in respect of safety is important • insurance companies will demand this documentation before covering the risk MATS231 Week 07 PLA-RCD.ppt

  6. Product Liability • before PLA: those affected had to prove that the damage had been caused by negligence on behalf of the manufacturer or distributor • now: the burden of proof is on the manufacturer to demonstrate product safety considerations were integrated into design and production MATS231 Week 07 PLA-RCD.ppt

  7. Product Liability • Three types of defects that incur liability • design defects • exist before the product is manufactured • manufacturing defects • occur during the construction or production • defects in marketing • improper instructions and failures to warn consumers of latent dangers in the product. MATS231 Week 07 PLA-RCD.ppt

  8. Safety factors

  9. Safety factors • BS British Standard Specifications • EN Europaische Norm (European Standard) • ISO International Organization for Standardization MATS231 Week 07 PLA-RCD.ppt

  10. Safety factors • British Standard Specifications • BS 1088:1966 (1988) untreated plywood for marine craft • BS EN 1095:1998 deck safety harnesses and safety lines • BS 4079:1966 (1988) plywood for marine craft treated against attack by fungi or marine borers • BS 4532:1969 (1989) snorkels and face masks • BS 7209:1990 (1997) water vapour permeable apparel fabrics • BS 7852:1997 code of practice for the design of canoes and kayaks the above list only shows a few representative examples MATS231 Week 07 PLA-RCD.ppt

  11. Small craft – Hull construction and scantlings .. length up to 23 m 1 Materials: resins, reinforcement, laminate (2000) 2 Materials: sandwich cores (2002) 3 Materials: steel, aluminium, wood, other (2002) 4 Workshop/manufacturing conditions (2002) 5 Design pressures, stresses, scantlings (2008) 6 Structural arrangements and details (2008) 7 Scantling determination of multihulls (2008) 8 Rudders (2009) • Sailing boats: appendages and rig attachment (2012) • Scantlings – rig loads and attachments (new) +A1 Coating plants. Spray booths. Safety (2009) Parts 1-7 in Plymouth Campus Library MATS231 Week 07 PLA-RCD.ppt

  12. British Standard BS EN 12215:2002 • Will Harris’ Cornish Crabber 12 • infused hull • scantlings specified using ISO 12215-5 spread sheet from MST329 design exercise • image courtesy of WH • video of demoulding MATS231 Week 07 PLA-RCD.ppt

  13. Safety factors • British Standard Specifications • eg BS 4994:1987 Design and construction of vessels and tanks in reinforced plastics • may be appropriate to lightweight air-tanks for diving • Section 9 defines allowable and design unit loadings MATS231 Week 07 PLA-RCD.ppt

  14. Safety factors • BS 4994:1987 (FRP vessels and tanks) • k1 = factor relating to manufacture • k2 = factor relating to long term behaviour • k3 = factor relating to temperature • k4 = factor relating to cyclic loading • k5 = factor relating to curing procedure MATS231 Week 07 PLA-RCD.ppt

  15. Safety factors • BS 4994:1987 (FRP vessels and tanks) • The design factor = 3 x k1 x k2 x k3 x k4 x k5 • The factor 3 is constant and allows for • materials strength reduction due tolong-term loading (even in air) • No vessel or tank shall have K < 8 MATS231 Week 07 PLA-RCD.ppt

  16. Safety factors • BS 4994:1987 (FRP vessels and tanks) • k1 (method of manufacture) • k1 = 1.5 for handwork • k1 = 1.5 for machine controlled spray application • k1 = 3.0 for hand-held spray application • for spray application, strands shall be >32 mm long MATS231 Week 07 PLA-RCD.ppt

  17. Safety factors • BS 4994:1987 (FRP vessels and tanks) • k2 (chemical environment) • k2 = 1.2 with a thermoplastic liner • k2 = 1.2 to 2.0 without a thermoplastic liner • Appendix E gives guidance on selection of k2 MATS231 Week 07 PLA-RCD.ppt

  18. Safety factors • BS 4994:1987 (FRP vessels and tanks) • k3 (temperature) from 1 to 1.25 (Fig.1) • dependent on heat distortion temperature • k4 (cyclic loading) from Figure 2 • k5 (curing procedure) = 1.1 for post-cure to manufacturer specn = 1.3 for operation up to 45ºC = 1.5 for operation over 45ºC MATS231 Week 07 PLA-RCD.ppt

  19. Safety factors • BS 4994:1987 (FRP vessels and tanks) • k1 = 1.5 3.0 • k2 = 1.2 2.0 • k3 = 1.0 1.25 • k4 = 1.1 2.0 • k5 = 1.1 1.5 • K = 6.534 67.5 defaults to 8 MATS231 Week 07 PLA-RCD.ppt

  20. CE marking

  21. The CE mark • The official marking required by the European Community for all Electric- and Electronic equipment that will be sold, or put into service for the first time, anywhere in the European community. • It proves to the buyer -or user- that this product fulfills all essential safety and environmental requirements as they are defined in the so-called European Directives. The CE markings directive (93/68/EEC) was adopted in 1993. It amends 12 other directives. • The CE-directive gives a detailed description of the initials CE and any other marks specific to a particular directive and the ways conformity may be acquired. • The CE-mark must be put on the equipment, it's size must be 5 mm (0.2") or larger. MATS231 Week 07 PLA-RCD.ppt

  22. The CE mark • In return for fulfilling the CE marking requirements,the manufacturer or its agent gets the opportunity to cover the entire European market using only one approval procedure for the topics covered in the miscellaneous directives. • The member states of the EC cannot refuse any electronic or electrical product that has been CE marked (unless fraud suspected). • For some products however, national regulations may exist, as long as the topics covered in these national regulations are not covered by a pan-European Directive. An example is Ergonomics in Germany for PC-related equipment. MATS231 Week 07 PLA-RCD.ppt

  23. The CE mark • The manufacturer needs however: • be European, • or have an official department in the European Community, • or have an official agent or representative that is willing to take the liability for the CE-marking. • The CE mark is sufficient to allow exporting to all EC members • There are some restrictions left over for language variations in user documentation, notably safety instructions should be in the language of the country you are exporting to. • The attachment of the CE mark to your product MUST be founded on a Compliance statement of the manufacturer or importer. MATS231 Week 07 PLA-RCD.ppt

  24. The CE mark • 90/385/EEC Active Implantable Medical Devices Directive • 94/9/EC ATEX Directive (Electrical equipment for use in explosive atmospheres) • 2000/9/EC Cableway Installations for Passengers Directive • 93/68/EEC The CE Marking Directive • 93/15/EEC Civil Uses of Explosives Directive • 89/106/EEC Construction Products Directive • 89/336/EEC Electromagnetic Compatibility Directive • 96/57/EC Energy Efficiency Requirements: Household Refrigerators and Freezers • 92/75/EEC Energy Labelling Directive • 90/396/EEC Gas Appliances Directive • 92/42/EEC Hot Water Boilers Energy Efficiency Directive • 98/79/EC In-vitro Diagnostic Medical Devices • 95/16/EC Lift Safety Directive • 73/23/EEC Low Voltage Directive • Hot-links from http://www.conformance.co.uk/CE_MARKING/celist.html MATS231 Week 07 PLA-RCD.ppt

  25. The CE mark • 98/37/EC Machinery Safety Directive • 93/42/EEC Medical Devices Directive • 2000/14/EC Noise Emission of Outdoor Equipment Directive • 90/384/EEC Non-automatic Weighing Equipment Directive • 89/686/EEC Personal Protective Equipment Directive • 97/23/EC Pressure Equipment Directive • 1999/5/EC Radio and Telecommunications Terminal Equipment Directive • 94/25/EC Recreational Craft Directive • 98/13/EC Satellite Earth Station Equipment Directive • 87/404/EEC Simple Pressure Vessels Directive • 98/13/EC Telecommunications Terminal Equipment Directive • 88/378/EEC Toy Safety Directive Hot-links from http://www.conformance.co.uk/CE_MARKING/celist.html MATS231 Week 07 PLA-RCD.ppt

  26. Recreational Craft Directive (RCD)

  27. Recreational Craft Directive Image from http://ec.europa.eu/enterprise/maritime/maritime_regulatory/rc_introduction.htm MATS231 Week 07 PLA-RCD.ppt

  28. Recreational Craft Directive • The Recreational Craft Directive (94/25/EEC) Design and construction of boats from 2.5m to 24m hull length plus specified components. • Published in Official Journal L164 (30 June 1994) • In force 16 June 1996 (transition ends 15 June 1998) • Implemented in the UK by the Recreational Craft Regulations 1996 (SI 1996:1353) MATS231 Week 07 PLA-RCD.ppt

  29. Recreational Craft Directive The Directive does not apply to: • craft intended solely for racing • canoes, kayaks, gondolas and pedalos • surfboards and sailboards • historical replicas • submersibles • hovercraft and hydrofoils • craft intended to be crewedand to carry passengers for commercial purposes(these are covered by Directive 2009/45/EC). • craft built for use by the builder are also excluded provided they are not subsequently placed on the market for at least five years. MATS231 Week 07 PLA-RCD.ppt

  30. Recreational Craft Directive • Particular items of equipment are also covered • ignition-protected equipment for inboard and stern drive engines • start-in-gear protection devices for outboard engines • steering wheels, steering mechanisms and cable assemblies • fuel tanks and fuel hoses • prefabricated hatches and portlights. MATS231 Week 07 PLA-RCD.ppt

  31. Recreational Craft Directive • Administration requirements • the product be marked with the CE logo • the manufacturer compile a file of technical information • In the case of complete craft or hulls, this file is to include test reports or calculations demonstrating that the craft has adequate stability in the anticipated sea conditions. The manufacturer also has to complete a Declaration of Conformity. • the Directive also lays down requirements for type testing by a notified body and/or quality control procedures • no special provision for used craft • as such it is impossible for second hand craft to comply • used craft cannot be CE marked and therefore cannot be legally imported into the EEA MATS231 Week 07 PLA-RCD.ppt

  32. RCD file of technical info. • file of technical information • In the case of complete craft or hulls, this file is to include test reports or calculations demonstrating that the craft has adequate stabilityin the anticipated sea conditions. • the manufacturer also has to complete a Declaration of Conformity. MATS231 Week 07 PLA-RCD.ppt

  33. Directive 2003/44/ECamending Directive 94/25/EC • extend RCD scope to personal watercraft such as jet skis. • limit values for exhaust (CO, hydrocarbon, nitrogen oxides and various pollutants) & sound emissions of petrol/diesel engines MATS231 Week 07 PLA-RCD.ppt

  34. Directive 2013/53/EU • will effectively replace Directive 94/25/EC • covers recreational craft and personal watercraft. • additional exclusions in the new Directive for: • "external combustion steam powered watercraft,fuelled by coal, coke, wood, oil or gas", and • "amphibious vehicles,i.e. wheeled or track-laying motor vehicles,which are able to operate both on water and on solid land"

  35. Classification societies

  36. Classification society (UK) Lloyds Register of Shipping • Rules and Regulations for the Classification of Special Service Craft, 2003 • for classification of monohull and multihull craft, yachts, high speed and light displacement craft constructed from steel, aluminium alloys and composites. MATS231 Week 07 PLA-RCD.ppt

  37. Classification societies o/seas • American Bureau of Shipping (USA) • Bureau Veritas (France) • Det Norske Veritas (Norway) • Registro Italiano Navale Group (RINA) MATS231 Week 07 PLA-RCD.ppt

  38. Summary Product Liability Safety factors CE marking Recreational Craft Directive (RCD) Classification societies

More Related