1 / 9

Features: 1. 2D structural analysis (plane stress) 2. Static analysis 3. Quarter symmetric

Features: 1. 2D structural analysis (plane stress) 2. Static analysis 3. Quarter symmetric 4. SI units 5. Only the yoke is modeled 6. Material properties are at 4 K · SS304: Poisson’s ratio 0.279, Young’s modulus 210.0E9 Pa

celliott
Download Presentation

Features: 1. 2D structural analysis (plane stress) 2. Static analysis 3. Quarter symmetric

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Features: 1. 2D structural analysis (plane stress) 2. Static analysis 3. Quarter symmetric 4. SI units 5. Only the yoke is modeled 6. Material properties are at 4 K · SS304: Poisson’s ratio 0.279, Young’s modulus 210.0E9 Pa · Iron yoke: Poisson’s ratio 0.284, Young’s modulus 224.02E9 Pa, modeled as a solid material (not as laminations) 7. Loading conditions: 5.5 MPa applied vertically, 3.0 MPa applied horizontally (see geometry plot) 8. Boundary conditions: symmetry conditions on both horizontal and vertical geometric boundaries

  2. Model geometry, elements, boundary conditions, and loading

  3. Contour plot of horizontal displacements

  4. Contour plot of vertical displacements

  5. Contour plot of stress in horizontal direction

  6. Contour plot of stress in vertical direction

  7. Contour plot of stress intensity

  8. Contour plot of von Mises stress

  9. Note: Stress concentration at sharp corner

More Related