1 / 20

Turn your fabric inside out.

Turn your fabric inside out. Iron the fabric. Place your fabric so that the open end is at the top. You will begin sewing in the top right corner. Choose a width for your border and begin sewing. Don’t forget to reinforce your corners!!!.

channer
Download Presentation

Turn your fabric inside out.

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Turn your fabric inside out.

  2. Iron the fabric

  3. Place your fabric so that the open end is at the top. You will begin sewing in the top right corner.

  4. Choose a width for your border and begin sewing. Don’t forget to reinforce your corners!!!

  5. Sew until the needle is about the same distance from the edge of the fabric as the trim width you have chosen.

  6. With the needle in the fabric, pivot your fabric so you can begin the next seam.

  7. If needed, adjust your fabric to your trim width again. Don’t forget to reinforce your corner!!!

  8. Again, stop sewing when the needle is about the same distance as your border width from the end of the fabric.

  9. Don’t forget to reinforce your corner!!!!

  10. With the needle in the fabric, pivot to begin the new seam. Realign your fabric if needed.

  11. Begin sewing

  12. Don’t forget to reinforce your corner!!

  13. Sew until the needle is about the same distance from the end of your fabric as your trim width.

  14. Reinforce your corner.

  15. Pivot your fabric and realign if needed.

  16. Begin sewing the fourth side, which should be the open side. Do not sew all the way to the end!!! You must leave an opening to stuff the pillow!!!

  17. Reinforce the opening.

  18. Lift the presser foot. Gently pull the fabric to the left of the machine. Leave about 4 inches of thread coming from the machine and cut your thread.

  19. Your corners should look like this.

  20. Finish your pillow • Stuff your pillow through the opening that you left. • Be sure to push stuffing into the corners. • Force the stuffing away from the opening. • Sew the opening closed. • Work the stuffing inside to fill in the area near your opening.

More Related