1 / 5

Development of new Mice Target Stator. (or show and tell)

Development of new Mice Target Stator. (or show and tell). Rutherford Lab 13 th December 2011. Design. The main design work has been completed. It may require minor tweaks when we come to assemble the complete unit. Potting Jig. Final Assembly. Gallery. Copper & Silver Coils. Potting Jig.

cheche
Download Presentation

Development of new Mice Target Stator. (or show and tell)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Development of new Mice Target Stator.(or show and tell) Rutherford Lab 13th December 2011

  2. Design The main design work has been completed. It may require minor tweaks when we come to assemble the complete unit. Potting Jig Final Assembly

  3. Gallery Copper & Silver Coils Potting Jig New Slit

  4. Status • The Wire This has been one of the main holding items. At the moment is due to be delivered in the next 3 weeks. I have tried to source a UK supplier but without success. • Bobbins We have the original 3 bobbins one of which has 6 completed coils (awaiting wire to finish). Plus we have 3 more that are awaiting QA and then slitting at Oxford. These 3 look much better than the originals and I would prefer to use them depending on the timescales. There is also a further 1 possibly 2 at ACP should we choose to purchase them. • Electrical Distribution Boards We have enough boards at present to manufacture 3 complete units but they are made in house (IC) and we can get more as required. • Cooling Jacket Eamonn has taken the original design and improved on it. It now looks compact and efficient. • Gluing Jig This is completed but may need slight modifications/development when we use it.

  5. Conclusions Its been a long drawn out process where the items that were expected to take the least work and sweat turned out to be the difficult ones and vice versa. We hope that we have now ironed out most of the problems and can start to build stators early in the new year. We feel that most of our problems have been addressed though the slight worry is still the HV breakdown. There is a further process we can pursue if this continues to be a problem and that is to insulate the bobbin but this can be expensive.

More Related