200 likes | 529 Views
What Paint Should I Use?. The paint that you will need to select will depend on:The type of finish which you desire.The surface in which will be painted.Whether the paint will be used for interior or exterior purposes.. Latex-Base Paint. Easy to use and clean up.Dries quickly.Finish:High glossSemi glossLower lusterFlat Latex paint is not recommended for use on metal..
E N D
1. Paints, Sealers, and Stains Eric Olsen
Block 2005
2. What Paint Should I Use? The paint that you will need to select will depend on:
The type of finish which you desire.
The surface in which will be painted.
Whether the paint will be used for interior or exterior purposes.
3. Latex-Base Paint Easy to use and clean up.
Dries quickly.
Finish:
High gloss
Semi gloss
Lower luster
Flat
Latex paint is not recommended for use on metal.
4. Oil-Base Paint Made with linseed oil, tung oil, and other oils.
Dyring process is slower than latex.
Hard to dispose of.
Clean up is more difficult and it is recommended to use mineral spirits or paint thinner. (not gasoline)
5. Alkyd Paint A synthetic that is used in paint instead of oil.
Paints on with a smooth rich finish.
Much or durable than latex and a lot easier to clean up than oil-based.
All alkyd paints are toxic and combustible.
Always have good ventilation when painting with an alkyd paint.
Brushes that contain wet alkyd paint are a fire hazard.
6. Application of Paint Brushes
Rollers
Sprayers
7. Use Location Interior Paint:
To be used inside where it is protected from the rain and elements.
Used on walls, trim, and ceilings.
May use water or oil based
8. Use Location cont. Exterior Paint:
To be used outside where water and other elements are present.
Water, oil, or alkyd-base paints may be used.
9. Faux Glazing Techniques Color Washing:
Has a casual appearance
Can use different color palettes.
10. Glazing Techniques cont. Crackle:
This technique can be used on walls, trim, and cabinets.
You can have that “antique” look in just a day.
A combination of colors can be used.
11. Glazing Techniques cont. Ragging:
This is a very simple technique that produces a great effect.
It produces a fabric like texture
12. Glazing Techniques cont. Sponging:
Adds a soft texture and a rich depth to the walls.
A multiple number of colors can also be used for this technique.
13. Stains and Sealers Preparation:
Clean
Sand
Apply wood conditioner
14. Selecting a stain, sealer, or a combination. Stains:
Stains penetrate the wood, but still show the grain.
They do not have protectants.
Comes in a variety of types and colors.
15. Types of Stains Oil
Water
Gel
16. Sealants Sealants protect your finished project.
It keeps moisture out.
Can be brushed or sprayed on woods.
Examples:
Polyurethane
Thompson’s Water Sealant
17. References Sherwin Williams- Stephenville, Tx
http://www-ims.tamu.edu/docs2/TAKS221.doc
http://www.tea.state.tx.us/rules/tac/chapter119/ch119c.pdf