130 likes | 366 Views
Stellar Continua. How do we measure stellar continua? How precisely can we measure them? What are the units? What can we learn from the continuum? Temperature Luminosity Metallicity Presence of binary companions Bolometric corrections. Measuring Stellar Flux Distributions.
E N D
Stellar Continua • How do we measure stellar continua? • How precisely can we measure them? • What are the units? • What can we learn from the continuum? • Temperature • Luminosity • Metallicity • Presence of binary companions • Bolometric corrections
Measuring Stellar Flux Distributions • Low resolution spectroscopy • Wide spectra coverage • Access to fainter stars • Typically R~600 • Use a large (but not too large) entrance aperture • Correct for sky brightness and telluric extinction
Primary Photometric Standards • Vega (A0V) • Compared to standard laboratory sources, usually black bodies • Flux measured in ergs cm-2 s-1 A-1 at the top of the Earth’s atmosphere • Often plotted as • Fl vs. A • Fn vs. wavenumber (cm-1 = 1/l in cm) • Log Fl + constant vs. A • Log Fn + constant vs. wavenumber
Calculating Fl from V • Best estimate for Fl at V=0 at 5556A is Fl = 3.54 x 10-9 erg s-1 cm-2 A-1 Fl = 990 photon s-1 cm-2 A-1 Fl = 3.54 x 10-12 W m-2 A-1 • We can convert V magnitude to Fl: Log Fl = -0.400V – 8.451 (erg s-1 cm-2 A-1) Log Fn = -0.400V – 19.438 (erg s-1 cm-2 A-1) • With color correction for 5556 > 5480 A: Log Fl =-0.400V –8.451 – 0.018(B-V) (erg s-1 cm-2 A-1)
Assuming an atmosphere + telescope + spectrograph+ detector efficiency of 10%, how many photons would be detected per Angstrom at 5480A using a 1.2-m telescope to observe a star with V=12 (and B-V=1.6) for one hour? Using the CTIO 4-m telescope, an astronomer obtained 100 photons per A at 5480 A in a one hour exposure. Again assuming an overall efficiency of 10%, what was the magnitude of the star if B-V=0? Class Problems
Interpreting Stellar Flux DistributionsI. The Paschen Continuum • The Paschen continuum slope (B-V) is a good temperature indicator • Varies smoothly with changing temperature • Slope is negative (blue is brighter) for hot stars and positive (visual is brighter) for cooler stars • B-V works as a temperature indicator from 3500K to 9000K (but depends on metallicity) • For hotter stars, neutral H and H- opacities diminish, continuum slope dominated by Planck function, and the Rayleigh-Jeans approximation gives little temperature discrimination
The Paschen Continuum vs. Temperature 50,000 K 4000 K
Interpreting Stellar Flux DistributionsII – The Balmer Jump • The Balmer Jump is a measure of the change in the continuum height at 3647A due to hydrogen bound-free absorption • Measured using U-B photometry • Sensitive to temperature BUT ALSO • Sensitive to pressure or luminosity (at lower gravity, the Balmer jump is bigger – recall that kbf depends on ionization, and hence on Pe) • Works for 5000 < Teff < 10,000 (where Hbf opacity is significant)
Flux Distributions at T=8000 Log g = 4.5 Log g = 1.5
Bolometric Flux • Bolometric flux (Fbol) is the integral of Fn over all wavelengths • Fbol is measured in erg cm-2 s-1 at the Earth • Luminosity includes the surface area (where R is the distance from the source at which Fbol is measured): • L is measured in units of erg s-1
Bolometric Corrections • Can’t always measure Fbol • Compute bolometric corrections (BC) to correct measured flux (usually in the V band) to the total flux • BC is usually defined in magnitude units: BC = mV – mbol = Mv - Mbol
Class Problem • A binary system is comprised of an F0V star (B-V=0.30) and a G3IV star (B-V=0.72) of equal apparent magnitude. • Which star has the larger bolometric flux? • What is the difference between the stars in Mbol?