1 / 6

Crystalline (Glass) Flapper Valve Experiment

Crystalline (Glass) Flapper Valve Experiment. Craig E. Nelson - Consultant Engineer. Nature of the Test. A simple test jig was designed and built to test out the Crystalline Flapper Valve concept A simple “blow pipe” test was done in order to get a feel for general performance.

cole-ware
Download Presentation

Crystalline (Glass) Flapper Valve Experiment

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Crystalline (Glass) Flapper Valve Experiment Craig E. Nelson - Consultant Engineer

  2. Nature of the Test • A simple test jig was designed and built to test out the Crystalline Flapper Valve concept • A simple “blow pipe” test was done in order to get a feel for general performance Result and Summary • The crystalline flapper valve concept seems to be able to “rectify” the flow of air and • bubbly liquid without much trouble when tested by means of a blow pipe. It seals well with modest negative pressure and has a relatively low forward direction pressure drop. • The above, when coupled with the chemical resistance of the glass, low mechanical compliance, extremely low volume, thin aspect ratio, low cost and ease of fabrication, are rather encouraging for further work to test and evolve this design concept

  3. Cutaway View of the Test Jig Layout Outlet Hole O Ring Seal Crystalline Glass Flapper Valve Inlet Hole

  4. Crystalline Glass Flapper Bonded to Connector Plate

  5. Assembled Test Jig Layout Thin crystalline “flapper” Bond Region Inlet hole O Ring Seal

  6. Crystalline Glass Flapper Bonded to Connector Plate

More Related