60 likes | 66 Views
We offer Ethernet IP Subsystem, Ethernet MAC IP, Multi-Channel-Multi-Rate (MCMR) Forward Error Correction (FEC IP), PCS IP, OIF FlexE.
E N D
MAC IP-PCS IP-FIeX E IP • We offer Ethernet IP Subsystem, Ethernet MAC IP, Multi-Channel-Multi-Rate (MCMR) Forward Error Correction (FEC IP), PCS IP, OIF FlexE. • Support the adaptation of packet streams into a 400/200/100/50/25/10GE rts client port, into a FlexE client, or into an OPUk/OPUflex payload • Configurable maximum bandwidth (e.g. 400/ 600/800G/1T/1.2T/1.6T) • Configurable number of channels. Flexible channel B/W provisioning (10G, 40G, m*25G). A channel can use the entire B/W • IPG generation based using Deficit Idle Count • RFC 2819 RMON counters, in both directions • Packet snoop, based on programmable filters, in both directions. Configurable number of filters and filter depth • Link fault and packet error detection. Automatic consequent actions using detection link fault and packet error sideband signals
MCMR FEC IP • Multi-channel, multi-rate forward error correction (FEC) engine is fully configurable to support 400G/ 200G/ 100G/ 50G rates on multiple channels • The IP supports both KR4 RS(528,514) and KP4 RS(544,514) • Supports Interlaken, Flex Ethernet & 802.3x protocols standards • IP is highly programmable and configurable to tailor to customer specific requirements • Seamless integration with PCS, FlexE and Interlaken IP
PCS IP • Supports multi-rate 25G/50G/100G/200G/400G • 66b block lock, AM lock/de-skew/reorder, AM insertion/deletion and scrambling of 100/50/25/10GE ports w/o FEC • Transcoding, scrambling and AM insertion/ deletion for 400G/ 200G/ 100G/ 50E ports w/ FEC • Per-lane programmable markers • IP is highly programmable and configurable to tailor to customer specific requirements • Seamless integration with MCMR FEC, FlexE and MAC IP
FIeX E IP • FlexE client rates can support any rate up to MAX configured bandwidth of 1.6T with a granularity of 5G. Scalable to support up to N * FlexE groups • Channelization of input with each port bandwidth up to 100G (minimum bandwidth 5G) • User configurable rate-adapt feature on each FlexE port (Idle insert/delete) OR by masking FlexE slots as unused to support sub-rate PHYs • Bonding single higher bandwidth MAC data over multiple 100G PHYs (e.g. 200G/400G MAC) • Supports hybrid configuration of any combination of bonding, sub-rating and channelization • Supports FlexE aware/FlexE Unaware/FlexE terminated mode of operation • Run time add/remove a FlexE client to a FlexE group without affecting traffic on other clients • Resizing of FlexE client bandwidth within a single FlexE group
ODU I/F IP • Supports the adaptation of 400GE, 200GE, 100GE, 50GE, 25GE, 10GE, FlexE-clients and FlexE-aware signals into OTN • Full OPU payload processing (66b block lock, scrambling, AM lock, etc.) • Configurable maximum bandwidth (e.g. 400/ 600/800G/1T/1.6T) • Configurable number of channels. Flexible channel B/W provisioning (10G, 40G, m*25G). A channel can use the entire B/W • RFC 2819 RMON counters, in both directions • FlexE client rate adjust, for both ODUflex -> FlexE and FlexE -> ODUflex directions • Packet snoop, based on programmable filters, in both directions. Configurable number of filters and filter depth
Please do visit my website for in-depth information. Website: https://openfive.com/ MAC IP-PCS IP-FIeX E IP: https://openfive.com/ethernet-ip-subsystem/