1 / 17

Preferred Instruments CB-Hawk Replacement System

Preferred Instruments CB-Hawk Replacement System. “A low-cost upgrade for obsolete CB-Hawk systems”. Based on BurnerMate TS Technology. The History. Known as Honeywell BC-7700 and Cleaver-Brooks Hawk systems, thousands of units have been installed since the early 90’s.

cordell
Download Presentation

Preferred Instruments CB-Hawk Replacement System

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Preferred Instruments CB-Hawk Replacement System “A low-cost upgrade for obsolete CB-Hawk systems” Based on BurnerMate TS Technology www.preferred-mfg.com

  2. The History • Known as Honeywell BC-7700 and Cleaver-Brooks Hawk systems, thousands of units have been installed since the early 90’s. • Honeywell abruptly stopped manufacturing system components and spare parts over a year ago. www.preferred-mfg.com

  3. The Problem • CB has literally thousands of systems installed with very limited repair parts--many already gone. • CB’s answer is a very expensive PLC-based upgrade costing $17K-$40K plus installation. • Alternatively, C-B will convert the Hawk system to an RM-7800 for $7,000 (and lose all the functions of the Hawk system) www.preferred-mfg.com

  4. Preferred’s Solution • Introduced in 2005, the BurnerMate TS consists of: • A programmable DCS • A Honeywell flame relay • A touch-screen HMI. www.preferred-mfg.com

  5. Preferred’s Solution Preferred has configured a BurnerMate TS system to be a wire-for-wire replacement for the CB Hawk system. Installation is as simple as… • Replace Hawk sub-panel with Preferred sub-panel. • Replace gas & oil pressure sensors with pressure switches. www.preferred-mfg.com

  6. Preferred’s Solution Preferred has configured a BurnerMate TS system to be a wire-for-wire replacement for the CB Hawk system. • Replace steam pressure sensor with a pressure transmitter. (or temp. transmitter for hot water boilers) • Replace mod motor with Preferred SM-15 servo actuator www.preferred-mfg.com

  7. Preferred’s Solution Preferred has configured a BurnerMate TS system to be a wire-for-wire replacement for the CB Hawk system. • Remove CB Hawk keypad. • Install the Preferred touch-screen display. Blockware is pre-programmed. Commissioning is as easy as filling-in-the-blanks. www.preferred-mfg.com

  8. Preferred’s Solution Preferred has configured a BurnerMate TS system to be a wire-for-wire replacement for the CB Hawk system. • Existing control panel, entrance box, control switches, flame scanner, and operating limits are re-used. • Existing solid state gas and oil pressure sensors can be re-used for monitoring purposes. But don’t! They will fail eventually too and replacement parts are unavailable. www.preferred-mfg.com

  9. Easy Set-Up Fill-in-the-blanks on factory-configured screens. www.preferred-mfg.com

  10. Full Color Graphics www.preferred-mfg.com

  11. Full Color Graphics • The screen pages closely resemble the language and logic of the old Hawk systems. • “Fill-in-the-Blanks” commissioning. • Operators should not be intimidated and won’t have to “re-learn.” www.preferred-mfg.com

  12. Retrofit Advantages • Lowest cost, full function replacement • Easiest Conversion • Technology proven in thousands of PCC-III and DCS-III installations • Lowest install time www.preferred-mfg.com

  13. Product Improvements • Touch-screen is easier to use. • DCS-III is configurable for future upgrades. • PV inputs are standard, non-proprietary. • Gas and oil switches are standard, non-proprietary. • 10” touch-screens are available • NFPA compliant • U.L. 508 compliant www.preferred-mfg.com

  14. Product Improvements The BurnerMate TS can communicate with building management systems, energy management systems, or a DCS via open protocols including: • Ethernet IP-Standard • Modbus-Standard • Remote monitoring through standard web browser. www.preferred-mfg.com

  15. Cost Competitive • Material cost is under $15,000. • Product is packaged for easy installation in existing Hawk enclosures. This makes for a less expensive project than CB’s upgrade options. www.preferred-mfg.com

  16. Support • Proven BurnerMate Technology. • Fewer proprietary parts. • Industry-standard communications. • Software is pre-programmed for simplicity, but can easily be expanded for more functionality. • Rep and factory support available. • Free factory training is available. www.preferred-mfg.com

  17. Conclusion Contact your local Preferred representative or our factory if you have questions. www.preferred-mfg.com

More Related