The certification scheme for training institutions

1. The certification scheme for training institutions Presentert av Ellington Wilkins Lead auditor ASAS Sertifisering AS

2. ASAS SERTIFISERING AS Training institutions: 102 Certified technical control: 54 Both: 38 Total: 194

3. Certification body • Third-party conformity assessment body operating certification schemes. • Impartiality • No commercial, financial or otherpressures to compromiseimpartiality

4. Certification body • Confidentiality at all times • Commitment to the management of all informationrecieved or created during certification

5. Training requirements • All persons working with dangerous equipment in Norway • Certified safety training is required for the following types of work equipment: • Gantry cranes and overhead travelling cranes (if use involves danger to life or health). • Tower cranes • Mobile cranes • Portal cranes

6. Training requirements • Certified safety training is required for the following types of work equipment: • Cranes with a capacity greater than 2 tm when mounted on a truck or truck trailer • Lifting and stacking vehicles for goods with a permanent operator’s cabin on the vehicle • Earth moving machines with an effect greater than 15 kW (20.4 hp).

7. CERTIFICATION SCHEME Regulationgoverning organisation and management, Workplace, workactivity, forskrift om administration criteria’s, Trainee guidelines & additional criteria’s Based on specific requirements Training institutions/Technical control entities

8. Regulations Regulation 1356 For the workplace Regulation 1355 Organisation, management and participation Regulation 1360 For Administrative requirements Regulation 1357 Work operations

10. Exampleoftheevaluationprocess • Upon completion of this module, the trainee will be able to do the following: • Describe basic prestart activities for heavy equipment machinery. • Describe basic safety measures associated with operating heavy equipment. • Explain how to properly start, operate, and shut down the following types of heavy equipment: Dozers, loaders, backhoes, excavators, compaction equipment, motor graders, scrapers, on road dump trucks, off-road dump trucks.

11. Certification process • Application for certification • Accept of application / review • Document evaluation • Certification audit • Accept and correction of non - conformities • Verification • Certification documentation / certificate • Surveillence

12. Documentevaluation • Procedures for training in the use of earth moving equipment • Routines for access to necessary equipment that are in good technical operation • Routines for access to qualified competent instructors • Routines for maintenance of competence • Documentation of the technical control of equipment by impartial third party

13. Documentevaluation • Documentation of access to necessary and accepted literature • Documentation of acceptable course plan with allotted time • Routines/procedures for the examination of candidates (theoretical and practical) • Procedures for candidates with writing and or reading disabilities

14. Certification audit • Consists of confirmation/ verification of the before mentioned documentation • Verification of qualified instructors • Verification of the maintenance of competence of instructors • Verification of the participation of candidates • Verification of the use of theoretical literature/course materiel

15. Certification audit • Verification of the use of the required time • Verification of the theoretical examination of all candidates • Verification of access to and use of correct equipment for practical training • Verification of the practical examination of all candidates

16. Correction and accept of non-conformities • Based on the type of non-conformity (severe or non-severe) • A time frame for correcting the non-conformity will be agreed upon. • Review and accept of non-conformity.

17. Certification documentation • Four years • Requires annual surveillance by the certification body • Must adhere to the certification scheme and any directions from the certification body.

18. Surveillance • Annual audit/surveillance of the certified entity • Re-certification after four years

19. Sertifiseringsrevisjonen • Re-sertifisering

20. AppreciateyourattentionThankyou