1 / 4

NetFPGA Integration Setup

Configure your machine for .NetFPGA integration. Connect cables, set up NIC, and run useful commands for proper setup.

croft
Download Presentation

NetFPGA Integration Setup

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. NetFPGA Integration Setup This is the configuration of YOUR TEAM machine Plug in either cable “4/5 OR 8/9” Yellow in the top, Green in the bottom Dual NIC PCI-e GE eth1 : Local Client & Server (eth1 .. 2) GE eth2 : Not Connected Net-FPGA nf2c3 : Yellow (test5 or test8) GE PCI nf-testXX nf2c2 : Local Host Internet Router Hardware GE nf2c1 : Not Connected GE GE nf2c0 : Green (test4 or test9) Your TEAM nf-testXX machine

  2. Physical Configuration Key: EACH host runs a webserver e.g., to connect with a remote web server: links 192.168.4.1 eth1 of Host PC 192.168.X.Y Your (team) machine test4 (or test9) test5 (or test8) 0 7.1 192.168.6.* 192.168.9.* 4.1 1.1 2 1 192.168.3.*

  3. Subnet Configuration test4 (or test9) test5 (or test8) Your (team) machine .1.1 .4.1 .1.2 .4.2 .3.1 .3.2 .2.1 Not Conected .6.1 .5.1 .9.2 Not Connected Not Connected .8.1 .6.2 .9.1 .7.2 .7.1

  4. Useful commands /usr/local/P33 contains the config files To test against a working config: (for example on test4) cd /usr/local/P33 ./runme-per-reboot-test4 nf2_download ./reference_router.bit ./reference_sr32 -i cpuhw.nf-test4 -r rtable.EMPTY reference router now running on test4 For your machine cd /usr/local/P33 ./runme-team-machine nf2_download Your-NetFPGA-bits.bit Your-NetFPGA-Software -i cpuhw.nf-team-machine -r rtable.EMPTY your router now running on your machine

More Related