1 / 22

Light Vehicle Rollover

Light Vehicle Rollover. Background on NHTSA’s Activities in this Area. Light Vehicle Tow-away Crashes 1995-1999 NASS-CDS 3.4 million crashes per year. Light Vehicle Occupant Fatalities 1999 FARS 31,921 total occupants killed. Occupant Fatalities 1999 FARS. LTVs. Cars.

cupples
Download Presentation

Light Vehicle Rollover

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript


  1. Light Vehicle Rollover Background on NHTSA’s Activities in this Area

  2. Light Vehicle Tow-away Crashes 1995-1999 NASS-CDS3.4 million crashes per year Light Vehicle Occupant Fatalities 1999 FARS31,921 total occupants killed

  3. Occupant Fatalities 1999 FARS LTVs Cars

  4. Occupant Fatalities 1999 FARS SUVs Cars Vans Pickups

  5. Chronology of NHTSA Rollover Actions - Page 1 • 1973: Advance Notice of Proposed Rulemaking on Minimum Standard for Rollover Resistance • 1978: Terminate action because of the difficulty in getting tip-up and lack of repeatability • 1986: Rep. Wirth petitions for minimum standard based on Static Stability Factor (SSF) • 1987: NHTSA denies Wirth petition because of difficulties measuring SSF and because SSF, while correlated to rollover risk if there is a crash, does not predict likelihood of crash • 1992: NHTSA issues ANPRM for minimum standard for rollover resistance based on vehicle metrics

  6. The First NHTSA Rollover Rulemaking Action • 1973 ANPRM for safety standard “that would specify minimum performance requirements for rollover resistance” • Focus was on safety standard for the next 20 years • Goal is to set a level that eliminates unreasonable risk to safety • Challenge is to make it meaningful for cars and light trucks

  7. The First NHTSA Rollover Rulemaking Action (Cont’d) • Agency’s early-70’s work was focused on rollovers on flat road surfaces, with hard driving maneuvers to induce rollover • After years of work, we concluded • Difficult to get wheel lift with even these maneuvers • Even more difficult to repeat wheel lift response • Could not use these maneuvers for standard

  8. The Second NHTSA Rollover Rulemaking Action • NHTSA’s early work was with dynamic tests, but found too much variability • Mr. Wirth asked agency to use vehicle physical characteristics (SSF) as a surrogate measure of rollover propensity • From mid-80’s to mid-90’s, NHTSA analyzed different vehicle metrics as a potential means to address rollover • Three widely accepted metrics

  9. Static Stability Factor (SSF)T/2hFirst order estimate of steady state lateral acceleration when rollover begins.

  10. Critical Sliding Velocity (CSV)Theoretical lowest speed at which sliding sideways into a curb causes rollover. Vehicle Motion

  11. Tilt Table Angle (TTA)Minimum table angle at which a vehicle on the table will tip over.

  12. The Second NHTSA Rollover Rulemaking Action (Cont’d) • After evaluating a standard requiring a minimum SSF, NHTSA concluded: • Requested minimum would essentially make all vehicles cars - NOT NHTSA’s mission • SSF was too simple -correlated to rollover given a crash, but could not predict likelihood of being in a crash • Difficult to repeatably measure center-of-gravity height

  13. The Third NHTSA Rollover Rulemaking Action • In 1992, NHTSA began a rulemaking with the goal of using a vehicle metric other than SSF to establish a minimum performance standard • Hoped this would: • Establish a base level of rollover resistance • Use greater ease and repeatability of metrics • Find a metric better than SSF

  14. Chronology of NHTSA Rollover Actions - Page 2 • 1994: NHTSA terminates rulemaking on minimum standard, but proposes consumer information based on vehicle metric • 1994: Congress suspends rollover rulemaking until National Academy of Sciences (NAS) study of consumer information • 1996: NAS study published • 1996: NHTSA begins new study of feasibility of dynamic rollover • 1999: NHTSA publishes report of its testing results

  15. Safety Standard vs. Consumer Information • In 1994, we terminated rulemaking on a vehicle standard - benefits were too low to justify costs of redesigning most light trucks • Because of the difficulties of the standard, NHTSA suggested providing consumer information, instead of a standard • This would give the public helpful information about what they are buying without restricting their ability to buy small SUVs and pickups

  16. Recent NHTSA Testing of Dynamic Maneuvers • In 1997, NHTSA set out to see if it was now possible to develop a practicable, repeatable and appropriate emergency handling test • Chose best procedures from existing literature and selected some for further analysis • After analysis, did further testing with three maneuvers

  17. J-Turn Maneuver brake pulse (if applicable) steering pulse hold steering & throttle accelerate to target test speed start

  18. Toyota Fishhook Maneuver

  19. Resonant Steer Maneuver Step 1 Measure resonant steering frequency: Start: 0.2 Hz Start: 0.2 Hz End: 1.5 Hz End: 1.5 Hz increasing steering frequency Vehicle Path Vehicle Path Step 2 Drive test vehicle at resonant steering frequency: constant steering frequency Vehicle Path

  20. Conclusions on Dynamic Testing vs Metrics • These dynamic tests give reasonable results that correspond to real-world performance • But dynamic tests are not better than metrics at predicting rollover involvement. • Extra expense of dynamic testing is substantial. • Several practical problems remain with vehicle testing: • Use of human driver leads to safety concerns and mandates use of outriggers. • Outriggers affect handling. • Tire debeading may mask true limit behavior

  21. Why Choose SSF as the Metric for Consumer Information? • None of the three metrics was the clear winner statistically. • SSF is the only metric that will do no harm. • SSF has broad industry acceptance as “first order” design consideration. • SSF is least complex, intuitively related to rollover.

  22. Rollover Actions in the Past 12 Months • June 2000: NHTSA proposes rollover consumer information using SSF • October 2000: Congress mandates NAS study of NHTSA’s proposed SSF rollover information program • November 2000: Congress requires NHTSA to provide consumer information on performance in dynamic rollover testing as of November 2002 • January 2001: NHTSA issues first rollover ratings based on SSF

More Related