190 likes | 563 Views
Auxiliary Power Supply System. By CGS Gunasekara. Content. Why auxiliary supply is needed ? Equipments supplied through auxillary. Modes of operation. Demonstration of operation. Why auxiliary supply is needed ?
E N D
Auxiliary Power Supply System By CGS Gunasekara
Content • Why auxiliary supply is needed ? • Equipments supplied through auxillary. • Modes of operation. • Demonstration of operation
Why auxiliary supply is needed ? To supply power to generator/turbine and other ancillary equipments for their operation.
Equipments supplied by auxiliary. Common supplies • Lighting system • Annunciators & indicators, alarms • Ventilation system (supply fans, Exhaust fans) • AC system (compressures, blower fans) • Battery charging system (220 V , 48 V) • Drainage pumps • Communication system
Turbine & Generator • Instrumentation (metering) • Protection relays • Bearing oil pumps • Air compressors • (to operate governor equipment • Turbine , break system) • Cooling water pumps (stator coolers, bearing oil coolers) • Bearing oil pumps • Generator Heaters
Modes of operation (1) From 220 KV bus through main T/F1,2,3 and through HAD3,5, or 6 (to both ESS & Non-ess sides) (2) Generators through HAD3,5 or 6 (to both ESS & Non-ess sides) (3) DG ( only to ESS side, can not extend to Non-Ess side)
*Voltage : 220 KV bus voltage 13.8 KV 11 KV400 V 3 ph
* Voltage : through DG T/F 400 V step up to 11 KV 400 V 3 ph
Demonstration of operation Auxiliary supply system demonstration.exe Note: To run the exe file, 1. Down load the APSS.rar file . 2. Unzip that file to the same folder where APSS.ppt is available. 3. Now, click above link