1 / 2

32” DARFON PSU ( 1200057003 / 1200057004 / 1200054938)

32” DARFON PSU ( 1200057003 / 1200057004 / 1200054938). Field complaint : Fresh defective (Dead) Reason: BD1( DIODE BRIDGE KBJ408G 4A 800V ) track cut. QP2( FET MOS TK12A60U 12A 600V TO-220F TOSHIBA)QM5,Q13,Q14 track cut . QP2 lead broken.

dara-burke
Download Presentation

32” DARFON PSU ( 1200057003 / 1200057004 / 1200054938)

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. 32” DARFON PSU ( 1200057003 / 1200057004 / 1200054938) • Field complaint : Fresh defective (Dead) • Reason: • BD1(DIODE BRIDGE KBJ408G 4A 800V ) track cut. • QP2(FET MOS TK12A60U 12A 600V TO-220F TOSHIBA)QM5,Q13,Q14 track cut. • QP2 lead broken. • Corrective action : To be checked and resolder in field in case of dead. • Preventive action : PSU To be packed in individual box Note : check the PSU in cold condition before connecting in system

  2. 32” DARFON PSU ( 1200057003 / 1200057004 / 1200054938) • Field complaint : No backlight ( Audio OK) • Reason: • Protection is enable ( PT pin) • Corrective action : remove the PT wire from connector CN3 ( pin 19 & pin 20). However this is to be done in case of problem only. It is not recommended to remove PT wire but after replacing new PSU if you observed above symtom you can remove in stray case.

More Related