1 / 13

Status of MRS photodiodes

Status of MRS photodiodes. Yury Kudenko INR, Moscow. ND280 Convener’s Meeting, 9 June 2006. MRS photodiodes: basic information parameters test results Sci/WLS detectors for SMRD: geometry parameters beam test

davina
Download Presentation

Status of MRS photodiodes

An Image/Link below is provided (as is) to download presentation Download Policy: Content on the Website is provided to you AS IS for your information and personal use and may not be sold / licensed / shared on other websites without getting consent from its author. Content is provided to you AS IS for your information and personal use only. Download presentation by click this link. While downloading, if for some reason you are not able to download a presentation, the publisher may have deleted the file from their server. During download, if you can't get a presentation, the file might be deleted by the publisher.

E N D

Presentation Transcript

  1. Status of MRS photodiodes Yury Kudenko INR, Moscow ND280 Convener’s Meeting, 9 June 2006 December 2005

  2. MRS photodiodes: basic information parameters test results Sci/WLS detectors for SMRD: geometry parameters beam test presented in Physics/0606037 2 December 2005

  3. MRS APD Manufacturer CPTA, Moscow Sensitive area 1.1 mm2 Number of pixels 556 Geometrical efficiency 75-80 % Bias voltage range 25-50 V Power consumption 0.025 mW Gain ≤ 106 Sensitivity to magnetic field( 4T) no 1.17 mm 3 About 300 devices were tested by now December 2005

  4. PDE, cross-talk, dark rate 4 operational voltage December 2005

  5. Linearity 5 December 2005

  6. Recovery time t First pulse 50, 100, 300, 600 p.e. 6 December 2005

  7. Lifetime update • 18 MRS diodes were heated for 30 days • All showed good stability of l.y. 2 MRS APD 7 December 2005

  8. About 300 CPTA devices are studied for more than 2.5 years 4 devices are dead: 1 damaged mechanically 1 during temperature test 2 under operation at room temperature Now: 20 photodiodes are under bias voltage for 40 days ALL are OK Devices look very reliable and stable 8 December 2005

  9. New compact package for MRS diodes MRS APD octagonal Side-to-side 1.17 mm Sensitive area 1.1 mm2 Package Ceramics Diameter about 4 mm Thickness 1.5–2.0 mm PIN distance 2.5 mm Tolerance 20 m 9 December 2005

  10. Conclusion & Plan Main parameters: Dark rate (at 0.5 p.e.) ≤ 1MHz (room temperature 22oC) PDE 10-16 % Long time stability good Temp gradient of PDE (gain corrected) ~ -1.8% Cross talk ≤ 5-6 % Plan: New compact package for MRS diodes is under development at MARS Company (Russia) - INR-CPTA-MARS meeting on 15 June for design and production - First 20 ceramics packages June 2006 - MRS diodes in ceramics July 2006 - Test of MRS diodes in new package August 2006 Design of optical connector depends on new package Several options are under discussion For SMRD detectors - August/September if ceramics OK. 10 December 2005

  11. SMRD modules with MRS readout (1) One module consists of 4 counters One counter 87 x 17 x 1 ccm Extruded scintillators Bent Y11 WLS fibers Two end readout using MRS APD through optical connectors Package: Two Al bars each with 4 holes for readout Al foil of 300-400 mkm thickness Epoxy glue Should be studied in tests : Parameters Long time stability Temperature effects Fiber/MRS connection, optical isolation Humidity Mechanical performance…. 11 December 2005

  12. SMRD modules with MRS readout (2) 2 1 3 4 12 December 2005

  13. SMRD modules with MRS readout (3) 1 2 4 3 13 December 2005

More Related