The EU Training Programme for Turkish Chamber Executives Machinery

1. The EU Training Programmefor Turkish Chamber ExecutivesMachinery Mr Henk de Pauw, Eurochambres expert henk.depauw@certif.be Ankara, 18 June 2009 Istanbul, 19 June 2009 www.eurochambres.eu Eurochambres • Chamber House • 19 A/D Avenue des Arts • B-1000 Brussels • BelgiumTel: +32 (0)2 282 08 50 • Fax +32 (0)2 230 00 38 • Email: eurochambres@eurochambres.eu

2. Before CE

3. After CE

4. When is a product a "machine" ? • Are the following products a "machine" ?

5. Are the following products a "machine" ?

6. Are the following products a "machine" ?

7. Are the following products a "machine" ?

8. Are the following products a "machine" ?

9. Definition of a machine • An assembly of linked parts or components • At least one of the components moves • joined together for a specific application

10. What Else ? • Safety Components • Lifting Eqpt.

11. Definition of a machine

12. Definition of a machine • An assembly of linked parts or components • At least one of the components moves • joined together for a specific application

13. What Not: excluded from the directive ? • Machinery whose only power source is directly applied manual effort, unless it is a machine used for lifting or lowering loads. • Machinery covered by other Directives • Means of Transport

14. What Not: excluded from the directive ?

15. What Not: excluded from the directive ?

16. What Not: specific cases • Firearms • Eqpt. for use in fairgrounds and/or amusement parks • Everything radioactive • Military or Police eqpt

17. Directive Applicable ? Other Directive ? No Yes Certification by a Notified Body Annex IV Machine ? Self-Certification by Manufacturer Yes No Procedure

18. Annex IV Machinery • Several pieces of woodworking eqpt • Other dangerous machinery

19. The CE-mark should be affixed when the machine is... • ...placed on the market for the first timeor • ...put into service for the first time

20. Self Certification by Manufacturer • Administrative Obligations • Constructive Obligations

21. Self certification by the Mftr: Administrative Obligations • Technical Construction File • See previous chapter • Declaration of Conformity • Declaration type IIA • Declaration type IIB • Parts • For customs reasons only • Declaration type IIC • Safety Components

22. Self certification by the Mftr: Constructive Obligations • Construct in accordance to the Essential Requirements • Apply the CE Mark

23. Noise Emissions by equipment for use outdoors • Only applicable to equipment listed specificaly in art. 12 &13 • Art. 12: equipment subject to noise LIMITATIONS • Art 13: equipment subject to noise MARKING

24. Machinery directive: the future • Directive 2006/42/EC was published on 9th June 2006. • Applicable from 29th December 2009 • Updates on http://europa.eu.int/comm/enterprise/mechan_equipment/machinery/index.htm

25. Machinery directive: the future • The scope of the Machinery Directive is extended • The borderline between the Machinery and the Low Voltage Directives is clarified. • The borderline with the Lifts Directive has also been clarified. • The range of safety components subject to the Machinery Directive has been clarified.

26. Machinery directive: the future • Redrafting (little change) of the essential requirements • More options for annex IV manufacturers • More powers for market surveillance

27. Thank you… Please feel free to contact us eurochambres@eurochambres.eu Machinery Withthesupport of the European Commission www.eurochambres.eu Eurochambres • Chamber House • 19 A/D Avenue des Arts • B-1000 Brussels • BelgiumTel: +32 (0)2 282 08 50 • Fax +32 (0)2 230 00 38 • Email: eurochambres@eurochambres.eu