200 likes | 439 Views
MSD 1 P12453 Final Project Review. Markus Holzenkamp Robin Leili-Marrazzo Cody Anderson. Agenda. Project Summary Concept Summary System Architecture Test Results Design Summary Project Status Lessons Learned Future Work. Project Summary.
E N D
MSD 1 P12453Final Project Review Markus Holzenkamp Robin Leili-Marrazzo Cody Anderson Final Project Review
Agenda Project Summary Concept Summary System Architecture Test Results Design Summary Project Status Lessons Learned Future Work Final Project Review
Project Summary • Understand the current state of the compressor • Pre-exisitingsensors, DAQ capabilities • Operation characteristics of reciprocating compressors • Increase the current DAQ capabilities • Install and run ENVISION Condition monitoring system to be donated by Dresser-Rand • End Goal: Design, develop, and install effective health monitoring capabilities Final Project Review
Concept Summary • Identify important parameters • Identify best location to take measurement • Correct measurement • Robust install • Select appropriate sensors • Capabilities • Interfacing with DAQ Final Project Review
System Architecture (Analog) Final Project Review
System Architecture(Thermocouples) Final Project Review
Parameters with Test Results Final Project Review
Parameters with Test Results Final Project Review
Pressure Volume Diagram Detailed Design Review
Design Summary Sensor location was chosen based on accuracy of measurement and robustness We eliminated noise from the DAQ Different LabView interfaces were created to accommodate different needs Final Project Review
Cost Summary Final Project Review
Project Status • 13 Analog sensors installed and providing good data • Remaining two need a different connector • 12 Thermocouples installed and providing good data • Encoder installed and temporarily connected to RIT DAQ • Permanent connection will be Envision • 4 LabView VIs created to monitor characteristics and save data Final Project Review
Future Work Build and integrate Envision Refine code for P-V Diagram Final Project Review
Lessons Learned Design process from concept to product Communicating expectations Time management You will run out of time! Getting results is fun! Final Project Review
Thank You Our guide: Bill Nowak Our customer and advisor: Dr. J. Kolodziej Scott Delmotte at Dresser-Rand for technical support Final Project Review